HP Web Jetadmin 10.3 - User Guide

●
Redial on no answer: Enter the number of times that the internal modem redials when there is no
answer.
●
Redial on busy: Enter the number of times that the internal modem redials when there is a busy
signal.
●
Redial on error: Select this checkbox to enable the internal modem to automatically redial if a
communication error occurs while sending the fax. Select the number of times that the internal
modem redials from the list.
●
Detect dial tone: Select this checkbox to have the internal modem wait for a dial tone before
dialing.
8. In the Internal modem—Billing code settings section, specify the following settings for the internal
modem on the device:
●
Enable billing codes: Select this checkbox to prompt users to enter a billing code when faxes are
sent. If this option is selected, the billing code that the user enters is included in the billing code
report.
●
Default billing code: Enter the default billing code used.
●
Minimum length: Enter the minimum number of characters users can enter as a valid billing code.
NOTE: The maximum number of characters allowed for a billing code is 16.
●
Allow users to edit billing code: Select this checkbox to allow users to edit the billing code when
sending a fax. If this checkbox is not selected, the default billing code is always used.
9. In the LAN fax setup—LAN fax service settings section, specify the following settings for a third-party
fax device used over a LAN connection:
●
Third party LAN fax product: Select the third-party LAN fax device used.
●
File format: Specify the file format used for outgoing faxes.
10. In the LAN fax setup—Folder settings section, specify the following settings for accessing the server
where the LAN fax device stores fax jobs:
●
UNC folder path: Enter the path to the folder where fax jobs are stored using the Universal Naming
Convention (UNC) format. The format for a UNC path is “\\server\share\directory
path”, and it is not case-sensitive.
●
Windows domain: If the network is a Windows-based domain, enter the domain name.
●
User name: If the network requires authentication to access the fax folders, enter a valid user
name.
●
Password: If the network requires authentication to access the fax folders, enter the password for
the user name.
11. In the LAN fax setup—Dialing settings section, specify the following settings for the LAN fax device:
●
Maximum retry attempts: Enter the maximum number of times that the LAN fax device tries to
send the fax again if the first attempt fails.
●
Retry interval (minutes): Enter the number of minutes that the LAN fax device waits before trying
to send the fax again.
12. In the LAN fax setup—Input settings section, specify the following settings for the LAN fax device:
ENWW Device Configuration Options for Fax 393