HP Web Jetadmin 10.3 - User Guide

PEAP (configure certificate using EWS first): Protected Extensible Authentication Protocol.
A mutual authentication protocol that uses digital certificates for server authentication and
uses passwords for client authentication.
EAP-TLS (configure certificate using EWS first): EAP using Transport Level Security. A
mutual authentication protocol that uses digital certificates for server authentication and
uses passwords for client authentication. For additional security, the authentication
exchanges are encapsulated in TLS.
◦
Encryption strength: Select the minimum encryption strength to use during communications
with the authentication server. For each encryption strength, ciphers are specified to identify
the weakest cipher allowed.
Enable Wireless Direct
Use this option to enable or disable the HP wireless direct printing feature on the device. This feature
provides the ability to print from a wireless mobile device directly to an HP wireless direct-enabled printer
without requiring a connection to a network or the Internet.
To enable the HP wireless direct printing feature, select the Enable Wireless Direct checkbox.
To disable the HP wireless direct printing feature, clear the Enable Wireless Direct checkbox.
Enable Wireless Station
Use this option to enable or disable the wireless station settings.
To enable the wireless station settings, select the Enable Wireless Station checkbox.
To disable the wireless station settings, clear the Enable Wireless Station checkbox.
Radio State
Use this option to enable or disable the Wireless Radio feature. If the device is in wired mode, you can
configure the Wireless Radio state. If the device is in wireless station mode or access point mode, you cannot
configure the Wireless Radio state.
To configure this option, select the Disable Radio or Enable Radio option from the list.
Wireless Direct
HP wireless direct provides the ability to print from a mobile device, such as a smartphone or notebook
computer, directly to a printer without connecting to a wireless network. The mobile device must be within
range of the printer.
Use this option to configure the settings that are used to connect the mobile device to the printer.
To configure HP wireless direct, perform the following steps:
1. Select the Enable Security checkbox.
2. In the HP Wireless Direct Name box, enter the printer model.
The HP wireless direct name is the service set identifier (SSID). The SSID consists of the prefix in the
format of HP-Print-XY-, where XY is the last 2 characters of the HP Jetdirect 2800w NFC & Wireless
Direct Accessory hardware or media access control (MAC) address, and the suffix in the format of
printer_model.
378 Chapter 6 Device Configuration Options ENWW