HP Web Jetadmin 10.3 - User Guide

NOTE: The Smart Card sign in method is only available if an optional Smart Card reader accessory is
installed on your device.
If Smart Card sign in is required, all other sign in methods should be disabled. Certificates may need to be
installed on the Certificate Repository page.
Following are steps to configure this option:
1. Select Enable Smart Card Sign In Setup.
2. To add a trusted domain, type the name of the domain on the text field under Add Domain and then
click Add Domain. Or, to remove a trusted domain select the domain in the Trusted Domains list and
click Remove Domain.
3. Choose the default windows domain in Default Windows domain.
4. Type the name of the attribute that matches the email address in Retrieve the device user's email
address using this attribute.
SNMP Version Access Control
SNMPv3 protects the network management information that is sent between HP Web Jetadmin and a device
through user authentication and data encryption. SNMPv3 supports the MD5 and SHA1 authentication
protocols and the DES and AES-128 privacy protocols. SNMPv3 does not support the No Authentication
Protocol and No Privacy Protocol modes.
You can use SNMPv3 to prevent unauthorized users from viewing or changing device settings. You can
require SNMPv3 to view or change information on a device. You can allow SNMPv1 read-only access to the
device and also require SNMPv3 to change information on a device. SNMPv1 does not use data encryption
when sending information between HP Web Jetadmin and a device.
Use this option to enable and disable SNMPv3 on the device and specify the authentication protocol, privacy
protocol, and passphrases that are required.
Federal Information Processing Standard (FIPS) supports only the SHA-1 authentication protocol and
AES-128 privacy protocol. To create or update the SNMPv3 credentials when FIPS mode is enabled on the
device, you must specify the SHA-1 and AES-128 protocols. If you specify the MD5 authentication protocol
and DES privacy protocol, the configuration fails.
When configuring a passphrase on the device, you must enter the current passphrase, if any, regardless of
the credentials that are stored in HP Web Jetadmin. If you do not specify the current passphrase, the
configuration fails.
Following are steps to configure this option:
1. To enable SNMPv3, select the Enable SNMPv3 option. Specify the current SNMPv1 credentials, new
SNMPv3 credentials, and SNMPv1 settings.
2. To update the SNMPv3 credentials, select the Modify SNMPv3 option. Specify the current SNMPv3
credentials and the new SNMPv3 credentials.
3. To disable SNMPv3, select the Disable SNMPv3 option. Specify the current SNMPv3 credentials.
Temporary Limit Overrides
Use this option to override page limits for specific users in a permission set. If one or more users in a
permission set has a specific need to print more pages than the page limit for the group allows, you can set
an override for that user to allow for more page prints.
Following are steps to configure this option:
ENWW Device Configuration Options for Security 371