HP Web Jetadmin 10.3 - User Guide

To configure this option, select the desired default number of sides from the drop-down box.
Default Original Content
This option lets you specify the default type of information that is on the original document (Text, Graphics,
or Mixed). If you want to take advantage of the one-touch copying feature and the users typically copy
originals that have only graphics or only text, change the default to the appropriate type of information. This
eliminates the need for the users to specify the page content at the control panel each time they make
copies.
To configure this option, select the information type (Text, Graphics, or Mixed) from the drop-down box.
Default Original Density
This option lets you specify the default density and brightness of the copies, making all copies lighter or
darker than the original. If you want to take advantage of the one-touch copying feature and the users
typically make copies lighter or darker than the original, change the default to the appropriate density
setting. This eliminates the need for the users to specify the density at the control panel each time they make
copies.
To specify the density of the copies, select the value from the drop-down box. For minimum brightness
(darkest), select 0 or -125; for maximum brightness (lightest), select 8 or 125.
Default Original Media Size
This option lets you specify the default original media size of copied documents. The paper sensors override
the default. If the paper sensors cannot detect the size of the original, the product uses the default. If you
want to take advantage of the one-touch copying feature, change the default copy media size to the size of
the originals that the users typically copy. This eliminates the need for the users to specify the media size at
the control panel each time they make copies.
To specify the media size of the originals, select the media size from the drop-down list.
First Copy Speed
This option lets the device handle the speed for the first copy. If you do not use the copying functionality
frequently, you may take advantages to enable the fast first copy feature.
To disable this option, select No early warm up (default). The copying process might be slower for the first
copy.
To enable this option, select Early warm up. The copying process will be faster but it might cause excessive
wear on the device.
Hold Off Print Jobs During Copy
Use this option to prevent network print jobs from starting until after the product finishes printing a copy job.
You can specify if the hold off print job feature is enabled or disabled. Enabling this option will give walk-up
copying users priority over network print jobs, and the product will not start printing any network print jobs
as long as a user is interacting with the control panel.
Some products support the
Hold Off Time on page 335 option. The device will wait for the amount of time
that you specify for the
Hold Off Time on page 335 option after a copy job finishes printing before starting to
print any network print jobs.
NOTE: If you enable the hold off print job feature, you must also specify a value for the Hold Off Time
on page 335 option.
334 Chapter 6 Device Configuration Options ENWW