HP Web Jetadmin 10.3 - User Guide

Supply Delay Very Low Message
Use this option to set a threshold for the number of pages that the device prints after a supply reaches a very
low status before displaying a notification message. You can configure the threshold based on the usage
history for each supply to ensure that the very low message appears in time to order or locate a replacement
supply.
For example, if one color cartridge is used more than the other color cartridges, you can set a lower page
count threshold for that color cartridge. If another color cartridge is rarely used or a replacement cartridge is
readily available, you can set a higher page count threshold for that color cartridge to avoid having the
supply very low message displayed any longer than necessary.
Following are steps to configure this option:
1. Select the Enable option.
2. Select the checkbox next to the supply, and then enter the page count threshold for that supply in the
box.
NOTE: A higher page count threshold provides less warning before the supply runs out. Setting a page
count threshold that is too high might result in the supply running out before the supply very low
message appears.
To disable the very low supply message, select the Disable option.
Supply Levels Gauge
Use this option to control whether or not the supply levels gauge is displayed on the control panel for single-
function devices.
To display the supply levels gauge on the device control panel, select On. To hide the supply levels gauge on
the device control panel, select Off.
Supply Low Alerts
Use this option to enable or disable the supply low alerts. If this option is enabled, the device triggers an alert
when the supply is very low.
To enable supply low alerts, select the Enabled option.
To disable supply low alerts, select the Disabled option.
Supply Low Threshold
The following configuration options are addressed here:
●
Black Cartridge Low Threshold
●
Cyan Cartridge Low Threshold
●
Image Fuser Kit Low Threshold
●
Image Transfer Kit Low Threshold
●
Magenta Cartridge Low Threshold
●
Maintenance Kit Low Threshold
●
Yellow Cartridge Low Threshold
Use one or more of these options to specify the supply level threshold to reach before displaying a message
indicating that the supply is low. This can be configured according to the expected supply usage rate for a
ENWW Device Configuration Options for Supplies 327