HP Web Jetadmin 10.3 - User Guide

●
Save as Template: Starts the Create Alert Subscription Template wizard, with the subscription
settings that were selected; see
Create Alert Subscription Templates on page 185.
●
Unsubscribe: Stop subscribing to the alerts currently set for this device.
●
Edit Subscription: Make changes to the alerts for this subscription; see
Edit Alert Subscriptions
on page 182.
Other Ways to View Alert Subscriptions
●
From any device list or a group list, select the Alerts tab. The subscriptions for the selected devices are
displayed.
●
Right-click on Alerts in the left navigation pane and select View alerts subscriptions.
Firmware
●
All About Firmware
●
Task Modules for Firmware
●
Related Application Options for Firmware
●
Upgrade Firmware
●
Firmware Repository
All About Firmware
●
Qualifying Firmware
Both printer and HP Jetdirect device firmware can be updated from HP Web Jetadmin. A firmware image file
can be downloaded from
www.hp.com and put on the client system. It can then be imported into the
Firmware Repository. If the version of this image is greater than the version on the device, an upgrade is
possible. HP Web Jetadmin cannot be used to downgrade firmware to an older revision level. Firmware
updates can be scheduled to occur at any time. Firmware update retry is also available in cases where an
update failed or a device was not on the network.
To ensure this feature works properly, see
System Requirements on page 1.
Qualifying Firmware
●
Firmware Repository and Qualifying Firmware
●
Qualify Feature
●
Finding Images
Qualifying firmware images ensures that firmware images are tested by individuals with permissions to
qualify images before installing and implementing them in your workplace. When firmware images are
marked as Qualified, they are listed with the column Qualified in the Firmware Repository. With appropriate
permission, you can require firmware images to be qualified by clicking Edit Properties in the Firmware
Repository. If you do not have permission, you can only install firmware images that have been Qualified.
Permissions are set in Application Management > User Security > Roles; for permissions settings, select
Device Management > Firmware > Manage Repository.
192 Chapter 3 Device Management ENWW