HP Web Jetadmin 10.3 - User Guide

When capturing device settings via the Save As Template feature, these items should remain unchecked. If it
is desired to have these configuration options as part of the template, an edit can be performed on the
template after it has been saved and the desired configuration option can be selected and configured
appropriately. Once the modified template is saved, a version of the configuration option that supports
multiple configuration will be used and the operation should succeed. This situation will not occur during
normal use of multiple device configuration or when a configuration template is created independently from
a device.
Create a Configuration Template
●
Steps to Create a Configuration Template
●
Other Ways to Create a Configuration Template
Configuration templates are used to store device settings and apply those settings to one or more devices.
This can be done to keep device configurations consistent and to make it easy to apply a common set of
settings on a regular basis. Templates are an easy way to change the settings for regularly scheduled
configurations, without having to recreate the entire schedule. Templates can also be used to save many
settings from a device, either for backup purposes or to apply to similar devices.
Steps to Create a Configuration Template
1. In the Device Management navigation pane, right-click Configuration, and then select Create
configuration template. The Create Device Configuration Template wizard starts.
2. On the Select Template Models page, select the device models to configure, and then click the right
arrow button.
3. Select the network cards to configure, and then click the right arrow button.
4. Click Next. The Specify template options page appears, listing only the configuration options that
apply to the device models and network cards you selected.
5. Enter the name of the template (up to 48 characters).
6. Specify the settings for the configuration options to include in the template, and then click Next.
NOTE: If you click Back, any configuration settings you already specified might be lost when you
return to the Specify template options page. If you remove any device models or network cards on the
Select Template Models page, some configuration options might not be available when you return to
the Specify template options page. If you add device models or network cards on the Select Template
Models page, new configuration options might be available when you return to the Specify template
options page.
NOTE: For information about specific configuration options that might not work properly in a batch
mode, see
Captured Configurable Options and Configuration Templates on page 170.
NOTE: The configuration options selected for this template will only be applied to those devices that
support the options.
7. On the Confirm page, verify that the configuration option settings are correct, and then click Create
Template.
8. On the Results page, click the Done button.
ENWW Configuration 171