HP Web Jetadmin 10.3 - User Guide

discovery can also be filtered on both location and description strings if these are published to the Active
Directory.
Characteristics of Active Directory discoveries for network devices include:
●
You can activate Active Directory discovery by specifying AD location(s).
●
You can optionally set location and/or description filtering to narrow Active Directory discovery.
●
You can optionally specify Active Directory recursion searching to one or all levels below the specified
AD location or locations.
●
Active Directory discovery scans the directory for printer shares.
●
IP addresses that are resolved from printer shares are queried using SNMP.
●
Printers that are qualified are populated into the HP Web Jetadmin All Devices list.
●
Discovery is fast.
●
Discovery does not require any special privileges and relies on public Active Directory search.
●
Discovery is accurate to the extent that network printers are shared and published through Active
Directory.
●
Discovery relies on the fact that a default port name in the Active Directory share actually contains the
printer’s IP address.
Active Directory Discovery discovers published print queues in a network’s Active Directory. To find the
IP address of the network device to which the print queue is attached, AD discovery parses the print
queue’s port. An IP address can only be detected from those print queues with ports with the default
format of IP_www.xxx.yyy.zzz.
Active Directory Discoveries for PC-Connected Devices
Active Directory discoveries for PC-Connected devices use the LDAP protocol to identify Windows hosts on
the network. Each host identified is queried using the WMI protocol. Administrative credentials are required
for this discovery. Once a connection is established through WMI, the host is queried for a locally connected
printer.
Characteristics of Active Directory discoveries for PC-Connected devices include:
●
Settings are identical to discoveries for network devices.
●
Discoveries for PC-Connected devices scan Active Directory for Windows hosts.
●
SNMP queries are attempted on discovered nodes.
●
If no SNMP Proxy Agent response, WMI queries are performed when credentials exist in settings.
●
Local administrator credentials are required to perform this discovery.
Details About Running an Active Directory Discovery
Start here if one of the discovery methods you choose is Active Directory (while creating templates (
Create a
Discovery Template on page 154), editing templates (Edit a Discovery Template on page 156), or scheduling
(
Schedule a Discovery on page 151)), then the Specify Active Directory options page is displayed. On this
page, you can define options for Active Directory discoveries:
1. Type the path for the Active Directory location or browse to it. Then click Add; it will be displayed in the
list below.
2. Check next to any location you want included in the discovery.
ENWW Discovery 139