HP Web Jetadmin 10.3 - Proxy Agents Readme

●
Windows XP Professional (x86)
●
Windows XP Professional x64 Edition
●
Windows Vista Business (x86)
●
Windows Vista Business (x64)
●
Windows 7 Professional SP1 (x86)
●
Windows 7 Professional SP1 (x64)
●
Windows 8 Enterprise (x86)
●
Windows 8 Enterprise (x64)
●
Windows 8.1 Enterprise (x86)
●
Windows 8.1 Enterprise (x64)
●
Windows Server 2003 Standard Edition
●
Windows Server 2003 Standard x64 Edition
●
Windows Server 2008 Standard (x86)
●
Windows Server 2008 Standard (x64)
●
Windows Server 2008 R2 (x64)
●
Windows Server 2008 R2 SP1
●
Windows Server 2012
●
Windows Server 2012 R2
To allow queries from the HP Web Jetadmin server, the Windows SNMP service must be installed, configured,
and running as follows:
●
Configure the SNMP service Properties so that Accepted community names includes public with READ
ONLY rights.
●
Enable a configuration so that it can be modified by choosing and configuring a READ WRITE community
name.
●
Configure the SNMP service Properties to Accept SNMP packets from any host or from
HP Web Jetadmin.
NOTE: Microsoft does not include the SNMP service with the Home editions of Windows. The exact
mechanism for installing the SNMP service varies depending on the Windows version. In Windows 7, go to
Control Panel > Programs and Features, click Turn Windows features on or off on the sidebar, and then
enable the Simple Network Management Protocol (SNMP) feature.
Firewall settings must permit HP Web Jetadmin to query the proxy agent using SNMP. UDP port 161 should
be open.
NOTE: Not all versions of Windows automatically enable UDP port 161 when you install the SNMP service. If
the SNMP service is running, but cannot be accessed from a remote machine, the firewall on the PC might be
blocking SNMP traffic.
Install HP SNMP Proxy Agent
●
Standalone installation
ENWW Install HP SNMP Proxy Agent 3