HP Web Jetadmin 10.3 - Late Breaking News

The Access Control List configuration option is available in the Security category on the Config tab. The
first item in the ACL must be the IP address of the HP Web Jetadmin server or an IP address with a wide
subnet mask that includes the IP address of the HP Web Jetadmin server.
5. When setting or modifying the Duplex Binding configuration option for the HP LaserJet 600 Series,
users are no longer prompted to enter HP Embedded Web Server (EWS) credentials. This option is
available in the Device category on the Config tab.
6. For HP FutureSmart MFPs, when a user configures the Enable Send to Email option, but does not
configure the Outgoing Server option and configure the Default from setting on the Email Address/
Message Settings option, HP Web Jetadmin now reports an error message instead of claiming success
when nothing was configured.
7. Previously, HP Web Jetadmin did not accept special characters when setting up LDAP authentication on
the HP LaserJet M4555. This has now been fixed. In the HP Embedded Web Server (EWS), you can
specify two LDAP servers, separated by the pipe symbol (|).
8. The Media Type Administration configuration option is now available for the HP LaserJet 700 M712
and HP LaserJet 700 color MFP M775. This option is available in the Device category on the Config tab.
9. After upgrading to HP Web Jetadmin 10.3 SR3, automatic groups that contain filters that also contain
device groups work correctly. Previously, the upgrade to HP Web Jetadmin 10.3 SR2 resulted in broken
subgroups.
10. The Inactivity Timeout configuration option is now available for the HP Color LaserJet 700 M775. This
option is available in the Device category on the Config tab.
11. The Cartridge Very Low and Fuser Very Low alert messages are no longer triggered when the printer
door is opened on HP Color LaserJet CM3530 MFP, HP Color LaserJet CM6040 MFP, and HP LaserJet
M9050 MFP devices.
12. Users can now correctly configure and edit the Home Screen Language Selection configuration option
by using configuration templates.
13. The LDAP Settings configuration option can now be configured successfully in batch mode for
HP FutureSmart devices. This option is available in the Digital Sending category on the Config tab.
14. HP Web Jetadmin has been modified to correctly reflect the image drum installation date and other
details in the columns and reports for the HP Color LaserJet CM6040 MFP.
15. When a user applies the LAN Fax Service Settings configuration option in HP Web Jetadmin to a device,
the Send Fax as LAN Fax Service
option on the device itself is now als
o
set. When a user applies the Fax
Modem Settings configuration option in HP Web Jetadmin to a device, the Send Fax as directly from
the device's internal modem option on the device itself is now also set. The LAN Fax Service Settings
and Fax Modem Settings configuration options are available in the Fax category on the Config tab. This
code change applies to legacy HP LaserJet MFP devices.
16. The Edit functionality and configuration process of the Pharos solution installer is now working
correctly.
17. The Resend Upgrade value has been removed from the Status category in the Filter Editor.
18. HP Web Jetadmin no longer displays an error when users import .jar files by using the Device
Management > Solutions > Repository feature.
19. The Captaris RightFAX-HP MFP Module option is now available from the Third party LAN fax product
list on the Fax Send Settings configuration option. This option is available in the Fax category on the
Config tab.
20 Chapter 1 Late Breaking News for HP Web Jetadmin 10.3 SR7 (Edition 22, 7/2014) ENWW