HP Web Jetadmin 10.3 - Late Breaking News

18. HP Web Jetadmin no longer removes Home screen applications that should be left unchanged during
configuration.
19. New auto group filters that are defined as Device Group Contains Item <subgroup> now populate
correctly. However, existing filters must be edited and the subgroup must be reselected. The full path
to the subgroup is included in an existing filter only after reselecting the subgroup and saving the filter.
20. The LAN Fax Service Settings configuration option no longer disappears. In addition, the Condition on
which to notify list retains the default value of Do not notify when the Fax Notification configuration
option is configured with the following options via the HP Embedded Web Server and HP Web Jetadmin:
●
For Send faxes only
●
For Errors on Sending faxes
●
For Errors on Receiving faxes
This applies to HP Color LaserJet CM6040 MFP, HP Color LaserJet CM3530 MFP, HP LaserJet M9040 MFP,
and HP LaserJet M3035 MFP devices.
21. Re-applying Quick Sets on an HP device no longer fails if one of the Quick Sets requires a password.
22. Users can enable and disable the FTP Printing setting on the Network Enable Features configuration
option. This configuration option is available in the Network category on the Config tab.
When FTP is enabled on HP LaserJet M4345 MFP devices, the FTP Printing setting is available in the list
of network features in HP Web Jetadmin. When FTP is disabled on these devices, the FTP Printing
setting is now also available in the list of network features.
23. After running the restore.bat file under WJABackupRestore, the .dat file is no longer deleted from the C:
\hpwja_backup directory.
24. The default timeout for firmware upgrades has been changed from 1 hour to 2 hours to increase the
success rate of firmware upgrades on slower networks.
25. For legacy HP LaserJet devices, fonts and macros that have file names that are more than 50 characters
can now be applied.
HP Web Jetadmin 10.3 SR3 (10.3.88120)
The following are the improvements and fixes made in HP Web Jetadmin 10.3 SR3 (10.3.88120):
1. The EWS Information Page Protection configuration option has been added for the HP Color LaserJet
CP4520 Series. This option is available in the Security category on the Config tab.
2. Users can enter special characters in the User name field on the Fax Send Settings configuration
option. This option is available in the Fax category on the Config tab. To configure the user name, select
the Enable fax send checkbox, select LAN Fax Service from the Fax send method list, and then enter
the user name information in the Folder Settings section.
3. Optimized code has been added to HP Web Jetadmin 10.3 SR3 to enhance performance when devices
are deleted from automatic groups.
4. When configuring an Access Control List (ACL), HP Web Jetadmin now sends the IP address and subnet
mask together. In previous versions, HP Web Jetadmin sent the IP address in a separate package and
the printer automatically added a subnet mask of 255.255.255.255. This method blocked
HP Web Jetadmin from accessing the printer if the first IP address was not the IP address of the
HP Web Jetadmin server. Now HP Web Jetadmin can configure custom subnet masks.
ENWW Improvements and fixes in previous releases of HP Web Jetadmin 19