HP Web Jetadmin 10.3 - Late Breaking News

17. A new required parameter has been added to the command syntax to perform a silent installation of
HP Web Jetadmin 10.3 SR6 from the command line. To perform a silent installation, enter the following
command on the command line:
Wjasetup.exe /S /v/qn /V"WJA_EULA=ACCEPT
ENABLE_ANONYMIZED_DATA_COLLECTION=TRUE"
18. The Fax Send Setting configuration option does not work for PC-connected HP Officejet Pro 8600 Series
and HP Officejet Pro 8500A devices.
19. For the HP LaserJet M4555 MFP and HP Color LaserJet CM4540, sleep mode can now be disabled by
using the Sleep Timer Settings configuration option. Previously, this configuration option was called
Simple Power Management for One Watt.
For HP FutureSmart devices, the Sleep Timer Settings configuration option includes the option to
specify the number of minutes for the sleep delay. Any existing device configuration templates for
HP FutureSmart devices that include the Sleep Delay (Minutes) configuration option must be updated
to include the Sleep Timer Settings configuration option.
For non-HP FutureSmart devices, the Sleep Delay (Minutes) configuration will continue to be
supported.
20. For HP LaserJet Pro, HP Officejet Pro, and HP FutureSmart devices that use a UPI, WS Discovery must be
enabled.
If WS Discovery is disabled on HP LaserJet Pro and HP Officejet Pro devices, HP Web Jetadmin uses the
correct UPI and displays a Device Communication Error status for these devices after a device discovery
or a full refresh is performed.
If WS Discovery is disabled on HP FutureSmart devices, HP Web Jetadmin uses a generic device model
instead of the correct UPI after a device discovery or full refresh is performed.
A device refresh does not change the device status. Solution: If a device is in a Device Communication
Error status or a generic plug-in is used, the device remains in that status after a refresh is performed.
To display the device correctly, enable WS Discovery on the device, delete the device from
HP Web Jetadmin, and then rediscover the device.
21. HP Web Jetadmin does not display all of the solutions that are installed on HP FutureSmart devices on
the Solutions tab, although all of the solutions are displayed on the General tab in the device
HP Embedded Web Server.
Workaround: Most solutions are used with a Home screen application. To display the installed solutions
for HP FutureSmart devices, users can create an automatic group with filters for the solution's Home
screen application. For example, the following is the filter for a Home screen application called NSE
Scanner:
AnyItem([Home Screen Applications.All Apps], [EQ(\[Item.Application
Title\], \[NSE SCANNER\])])
22. For HP FutureSmart devices that have been in deep sleep mode (1 Watt mode), HP Web Jetadmin might
display them with a Device Communication Error status.
Solution: Disable Sleep mode or upgrade the firmware to HP FutureSmart Bundle 3.2.
23. In cases where users were using HP Web Jetadmin 10.3 SR3 with HP LaserJet Enterprise MFP flow M830
and HP LaserJet Enterprise M806 devices, these devices have a
Device Communication Error status
a
f
ter upgrading to HP Web Jetadmin 10.3 SR4 or later.
14 Chapter 1 Late Breaking News for HP Web Jetadmin 10.3 SR7 (Edition 22, 7/2014) ENWW