HP Web Jetadmin 10.2 - Configuring Hard Disk Security

Page 8
Identifying Unsecured Devices
Once the automatic group has finished populating itself with the secure disk view, the current
secure erase mode can be easily indentified. Click on the secure erase mode column heading
in order to sort by erase mode. Those devices that are configured with “Non-secure Fast Erase”
are unsecured.
In order to configure the secure erase mode, the file system password must be set. You can set
the file system password by selecting all of the devices without the file system password, then
select the config tab / file system / file system password. That will display the file system
password configuration fields. Keep the current password field blank, then add and confirm the
file system password. Hit apply at the bottom right when finished.
Configuring Secure Erase Mode
The best way to configure print and imaging devices is to use configuration templates.
Configuration templates are used to store device settings and apply those settings to one or
more devices. This can be done to keep device configurations consistent and to make it easy to
apply a common set of settings on a regular basis. Templates are an easy way to change the
settings for regularly scheduled configurations, without having to recreate the entire schedule.
Templates can also be used to save many settings from a device, either for backup purposes or
to apply to similar devices.