HP VPN Server Appliance sa3400/sa3450 - Regulatory Information, Hardware Installation and Safety Notices

Hewlett-Packard VPN Server Appliance SA3400/3450 Regulatory Information6
Hardware Installation
Mounting Options
The HP VPN Server Appliance SA3400/SA3450 has the
following mounting options:
• Standalone device
• Stationary rack
Standalone Device
You can place the HP VPN Server Appliance
SA3400/SA3450 on a secure surface as a standalone unit.
Stationary Rack
The HP VPN Server Appliance SA3400/SA3450 ships with
rack mounting ears. Install the ears in the appropriate
position for your communications rack and mount the
unit.
WARNING: The rack must be bolted to the floor, or anti-
tipping legs must be put in place before you install the
rack.
The HP VPN Server Appliance SA3400/SA3450 is 4U in
height. If the unit is mounted in an enclosed
communications rack, the recommended maximum rack
ambient temperature should be no greater than 40 degrees
Celsius.
Installation of t he equipment in the rack should be such
that the amount of airflow required for safe operation for
the equipment is not compromised.
Mounting of the equipment in the rack should be such that
a hazardous condition is not achieved due to uneven
mechanical load.