HP VPN Server Appliance sa3400/sa3450 - Regulatory Information, Hardware Installation and Safety Notices

Hewlett-Packard VPN Server Appliance SA3400/3450 Regulatory Information4
Electronic and Electrical
Specifications
VAC and Connector Specifications
The following table contains the VAC electrical and
connector specifications for the HP VPN Server Appliance
SA3400/SA3450.
Feature Specifications
Connectors 1 power cord connector
1 or 2 twisted-pair (10BaseT, 100BaseTX,
RJ-45) Ethernet connectors
The rear panel has two RS232 DB-9 male
connectors for serial cables to a terminal or
for modems with rates up to 115.2 Kbps.
Power
requirements
100 – 240 VAC
4.6 – 2.3 amps, 300 watts (max), 50/60 Hz
CAUTION: When installing multiple units
in a rack, do not overload the power circuit
to the rack.
Lithium Battery Usage Statement
There is danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type
battery, as recommended by the manufacturer. Discard
used batteries according to the manufacturer's
instructions.