sa3450 - Installation Guide

Saving New Device Information to a Configuration File

Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide

4-7

Saving New Device Information to a

Saving New Device Information to a Saving New Device Information to a

Saving New Device Information to a

Configuration File

Configuration FileConfiguration File

Configuration File

In this section, you save the configuration information you

entered in the preceding section, "Adding a VPN Device With

VPN Manager," to a file.

Steps

StepsSteps

Steps To save your configuration information to a file:

1. In the Configure menu, select Manager, then select

Password.

The VPN Manager window appears.

2. Enter and reenter the password to confirm it.

Note:

Note: Note:

Note: This password is for the device list only and is not

related to the password you entered when you initially ran

the Setup Script (Chapter 3, "Setting Up a Basic Routing

Mode Configuration on a New Device").

It is also unrelated to the password you entered in the

preceding section, "Adding a VPN Device With VPN

Manager," when you created a .imn extension file.

For more complete information about the passwords used

with your VPN device, see VPN Manager online Help, under

"passwords: about passwords."

3. Click OK.

You return to the VPN Manager main window.

4. In the File menu, select Save As.

The Save As window appears.

5. Enter a file name.

6. Click Save.

The file is available immediately for use.

Next Step

Next StepNext Step

Next Step Overview to Installing HP SA3000 Series VPN Client (page 5-1)