sa3450 - Installation Guide

Connecting the Device to the Network

Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide

3-13

Connecting the Device to the Network

Connecting the Device to the NetworkConnecting the Device to the Network

Connecting the Device to the Network

In this section, you connect your VPN device to the network

behind your firewall.

Steps

StepsSteps

Steps To connect the VPN device to the network:

1. Turn the device off before connecting network cables.

2. Connect the supplied Ethernet cables to the Ethernet

interfaces.

3. Connect your Ethernet LAN cables to the shielded cables.

4. Turn the device on.

Once you have connected your VPN device to the network

behind your firewall, configure the device using VPN

Manager included on the CD-ROM. Follow the instructions in

the next chapter, "Installing VPN Manager."

Next Step

Next StepNext Step

Next Step Configuring Syslog for Troubleshooting (page 3-13)