sa3450 and sa3000 Series VPN Manager - Release 6.8.2 Release Notes

Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450

Large Configuration File Takes Long Time

to Reload

Reference Numbers 493P and 701

In Release 6.8.2, if you TFTP a configuration file containing

20,474 static routes to a device and then do a reload, the

reload with this large routing table takes more than 60

minutes and the device is entirely occupied with the task.

100 Mbps TX LED Stays Lit When LAN

Cable Unplugged

Reference Number 425P

In Release 6.8.2, the 100 Mbps TX LED is not turned off

when the LAN cable is unplugged.

IP Route 0.0.0.0 Can Have Two Meanings

Reference Number 129P and 645

In Release 6.8.2, an IP route of 0.0.0.0 can be entered in the

VPN Manager. However, the 0.0.0.0 route also can be used

to specify a default gateway.

To work around this problem, do not use 0.0.0.0 as an IP

route.

PCB Not Freed With Synchronous

Interface After Overwhelming Traffic

Reference Number 652

In Release 6.8.2, if you send more packets through the

synchronous interface of a HP VPN Server Appliance

SA3450 than it can handle, during operation the device

stops transmitting. If you shut down the serial interface,

you free the packet control buffers (PCBs), but when you

re-enable the interface, it starts queuing packets and not

sending them.