HP VPN Server Appliance sa3110/sa3150/sa3400/sa3450 Network Layout Reference Guide

HP VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Network Layout Reference Guide
4 Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Network Layout Reference Guide
— The VPN device then transfers the traffic on to the local
network to which it is attached. The VPN device may or
may not perform firewall functions on the traffic.
• For direct dial into the PSTN:
— Traffic may go through a router or remote access server,
which may or may not perform NAT.
— The traffic then goes through the VPN device, which
may or may not perform firewall functions on the
traffic.
Figure: Inline Router Configuration
Figure: Inline Router ConfigurationFigure: Inline Router Configuration
Figure: Inline Router Configuration
Configuring an Inline Router Configuration
Configuring an Inline Router Configuration Configuring an Inline Router Configuration
Configuring an Inline Router Configuration
When setting up a VPN device, you must configure many global
configuration settings. You configure the VPN device through
the VPN Manager or command shell.
To set up an inline router configuration, use the configuration
parameters in the following table. Note that the values of these
parameters are examples only; you must enter values specific to
your network.
With/Without
Firewall
Functions
Internet
Router
Internet Connection
Direct Dial
VPND
Desktop
System
File Server
Laser Printer
PSTN
May/May Not NAT
Router Mode
Internal
Network
E0
E1
Router or
Remote Access Server
VPN Client