sa3450 and sa3000 Series VPN Manager - Release 6.8.2 Release Notes

Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450

Cannot Upload New Firmware and View

Configuration at the Same Time

Reference Numbers 607 and 739

In Release 6.8.2, uploading new firmware and attempting

to view that device's configuration at the same time from

the VPN Manager does not work. The configuration

window opens blank (empty) and remains blank and static

showing the progress indicator at 100%.

To work around this problem, do not attempt to upload

new firmware and to view the device's configuration at the

same time.

Windows 2000 Pro Manager Connectivity

Problem When Interface Setting Changed

Reference Numbers 611 and 743

In Release 6.8.2, on a VPN Manager running on a Windows

2000 Professional system, with traffic from a system other

than the one with the VPN Manager running on it, if you

change the interface setting from Auto or 100 to 10, and

there is no traffic to or from the device with the changed

setting, the VPN Manager PC loses its connection to the

device. Until one of the conditions is broken, VPN Manager

on a Windows 2000 system will not be able to

communicate with the VPN device to which the changes

were committed.

Note: If both interfaces are set to 10, you must go through

the Console and restore the e1 interface setting to Auto to

restore communication.

Misleading Message Displayed When

Changing ESP v1 Profile Authentication

Header

Reference Number 835

In Release 6.8.2, if you create a new ESP v1 security profile

and choose AH: Keyed MD5, AH Key Length: 1 and you

create a new site-to-site tunnel with this as its profile, if

you then set the AH Key, go back to the profile and change

the AH to Keyed MD5 Replay, when you return to the