HP VPN Server Appliance sa3110 - Regulatory Information, Hardware Information and Safety Notices

Hewlett-Packard VPN Server Appliance SA3110 Regulatory Information
7
Reliable earthing (grounding) of the unit should be
maintained. Particular attention should be given to supply
connections other than direct connections to the branch
circuit (such as power strips).
CAUTION: Ensure that a reliable earth ground is provided
for the rack.
Cabling Requirements
The HP VPN Server Appliance SA3110 is shipped with a
power cable and an RS232 DB-9 Admin cable. The power
cable is 6.5 feet (198 centimeters) in length, and the DB-9
Admin cable is 65 inches in length (160 centimeters). Use
the following information to plan for the additional cables
that you need.
The HP VPN Server Appliance SA3110 also comes with two
ferrite bead cables that attach to your 10BaseT/100BaseTX
Ethernet connection.
Management Console Cable Requirements
The HP VPN Server Appliance SA3110 back panel has two
standard RS232 DB-9 male connectors for a serial cross-
over cable (a null modem cable) to a management console,
or a serial straight-through cable to a modem. The cables
are not supplied.
Ethernet Cable Requirements
The HP VPN Server Appliance SA3110 supports twisted-
pair 10BaseT/100BaseTX Ethernet connections.
V.35 Serial Cable Requirements
The HP VPN Server Appliance SA3110 supports V.35 serial
connections, with the HP VPN Server Appliance SA3110
acting as a DTE device.