HP Server Appliance 3110 - Hardware Installation Map

Hardware Specifications
Hardware
•233-MHz Intel Pentium
®
MMX-based
motherboard; 8-MB PC Card; 32-MB RAM
•40W PSU, heat sink, and fan
(for Pentium CPUs)
•DB9 male-to-female null modem cable
Interfaces
•IEEE 802 Ethernet
•10BaseT/100BaseTX (10/100 Mbps)
•RS-232 interface for administration
Electrical
•Maximum current: 4–2 Amps
•Maximum power consumption: 75 watts
•Line Voltage: 100–240 VAC
•Frequency: 50/60 Hz
•Heat Output: 256 BTUs/hr
Physical
•19" rack-mount kit
•Height: 1.7" (4.3 cm)
•Width: 17.0" (43.2 cm)
•Depth: 10.0" (25.4 cm)
•Weight: 7.8 lbs. (3.5 kg)
Environmental
•Altitude: Up to 15,000 ft. (4,572 m)
•Operating temperature: 5°F–104°F
(10°C–40°C)
•Storage temperature: 32°F–122°F
(0°C–50°C)
•Relative humidity: 20%–80%,
noncondensing
EMC
•FCC Part 15 (USA) Class B
•ICES-003 (Canada) Class B
•EN 55022 (Europe) Class B
•AS/NZS 3548 (Australia) Class B
•VCCI, V3/93.01 (Japan) Class B
•EN 55024 (Europe)
Technical information in this document is subject
to change without notice.
© Copyright 2001 Hewlett-Packard Company.
All rights reserved.
Reproduction, adaptation, or translation without
prior written permission is prohibited except as
allowed under the copyright laws.
Printed in U.S.A., February 2001
HP: 5971-0881
P/N: A52444-001
Technical support: www.hp.com/serverappliances/support
HP sa3110.qxd 2/28/01 10:00 AM Page 4