HP VMA-series Memory Arrays VMA3205 & VMA3210 PCIe Direct-Connect Release Notes - August, 2012

Introduction
The VMA-series Memory Arrays (VMA) are external solid state Flash memory storage arrays. VMA
arrays provide scalable solid state capacities with higher performance and more reliability than
traditional magnetic media.
Features
The VMA provides:
• Scalable capacity, 5TB and 10TB models
• PCIe Direct Connectivity for in-system bandwidth and performance
• Up to 240K sustained random write IOPS (4K block with RAID)
• 350K random read IOPS
These release notes include information on the following VMA-series Memory Array products with
PCIe-direct connection option:
VMA3205
VMA3210
For information on firmware releases for this product, please refer to the array firmware release
notes.
Figure 1: HP VMA-series Memory Arrays
HP Supported Configurations
While other configurations of the VMA-series array may be possible, only the following
configurations have been fully tested and are supported by HP at the time of this document. If you
are using a configuration not listed below as a supported configuration, you may be asked to
reconfigure your environment to comply with a supported configuration for HP support entitlement.