HP VMA-series Cable Management System - Read This First

2. Using the built-in captive screws, torque to 4.7 in-lb (standard for an M3 screw, as shown in
Table 1).
Table 1 Torque specifications
MAXIMUM & MINIMUM TORQUE SPECIFICATIONS FOR ENGLISH AND METRIC SCREWS
Maximum TorqueMinimum TorqueMetric ThreadEnglish Thread
N-min-lbN-min-lbMajor Dia.SizeMajor Dia.Size
0.252.20.171.50.079”M 2.086”2-56
0.534.70.373.30.118”M 3.112”4-40
0.988.70.696.10.138”M 3.5.138”6-32
2.0117.81.51130.157”M 4.1648-32
4.4034.03.6027.00.197”M 5.190”10-32
7.35656.2255.00.236”M 6.250”1/4-20
Installing the cable management bracket to the rails
1. To attach the rails-side cable management bracket (A0R63-0002A) to the right side of the rails,
use the four (4-40) screws.
2. Use the Phillips head screw driver to torque to 4.7 in-lb (see Table 1).
Note the right side is facing the rear of the chassis.
Installing the cable management bracket to the rails 5