HP VMA SAN Gateway Software Update Guide

Performing a Gateway OE Update operation on the gateway
1. To update the VMA SAN Gateway with the new uploaded gateway OE update image, issue
the upgrade command as follows:
# cluster upgrade <.img filename> immediate
Where <.img filename> is the name of the OE update file as shown with the show
images command.
You will be asked whether you really want to update the gateway now. An update of the
gateway OE image causes the gateway to reboot and any I/O access and data availability
through this gateway being updated is disrupted.
2. Respond yes to both questions to start the gateway OE update process and gateway reboot
to activate the new OE image version.
You can monitor the gateway OE update process from the CLI connection. If you are connected
and using the gateway CLI over the network, the network session will be disconnected when
the gateway reboots.
Performing a Gateway OE Update operation on the gateway 9