HP VMA SAN Gateway Software Update Guide

After you enter the URL for the gateway OE update image, click UPGRADE and the gateway
OE update image is copied from the web server to the gateway and then the gateway OE is
updated from the image.
Note that an immediate reboot of the gateway occurs as part of this process. Any access to
the gateway or access to connected VMA Arrays through the gateway is disrupted while the
gateway reboots.
3. Click OK to proceed. Or, click Cancel and perform this process at another time. If approved,
the OE update image is copied, the gateway is updated from the OE image and the gateway
reboots. Progress messages display in the lower portion of the web interface as shown below.
14 Using a web interface and a web server