HP VMA SAN Gateway for VMA-series Memory Arrays Release Notes - May 2012 - Software OE version G5.1.0

8
Figure 5: Correct connections for two VMA-series Memory Arrays to one VMA SAN Gateway
VMA SAN Gateway software configuration
Please take time to review the HP VMA SAN Gateway Installation and User Guide to become familiar
with the available commands and features.
On first login to the VMA SAN Gateway, you will be prompted if you want to run the setup wizard. It
is recommended to use the setup wizard at this time so that you can enter key configuration
parameters required before you can begin using the VMA SAN Gateway with connected VMA-series
Memory Arrays. The setup wizard guides you through entering configuration settings for such things
as:
• VMA SAN Gateway IP address
• Ethernet interface to use
• DNS server IP address
• Site domain name
• Changing the default Gateway Hostname
• Setting a password
• Setting the Time and Time source
• E-mail notification settings
Chapter 3 of the HP VMA SAN Gateway Installation and User Guide (document number AM456-
9007B Rev 2) provides guidance for setting up the software configuration of the VMA SAN Gateway.
You can re-run the setup wizard at a later time by using the command
configuration jump-start.