HP Virtual Connect Enterprise Manager 7.1 Update 1 User Guide

◦ Maximum Link Connection Speed
◦ Network Access Groups (associated with this network)
• For each Fibre Channel SAN Fabric:
Fabric name◦
◦ Fabric port location
◦ Configuration speed
• Number of Fibre Channel SAN Fabrics configured in the VC Domain
To add an unconfigured VC Module to a VC Domain Group, the following items must be identical:
• Interconnect bays location and model
• Enclosure model
• Uplinks of the network and Fibre Channel SAN Fabric
• Power state of the VC Modules
VC 3.7x features that must be disabled in a VC Domain to be part of a VC Domain
Group with VC firmware 3.5x and 3.6x
The following features are not supported:
• Direct Attach storage is not supported.
Figure 12 SAN fabrics with direct attach fabric type
To disable this feature delete all direct attach SAN fabrics.
• The SNMP access feature is not supported. To disable this feature delete all the items on the
SNMP access table. See Figure 13 (page 35) for more information.
34 Managing VC Domains