SDN Controller Programming Guide

129
NOTE
The following information describes the process using two different versions of Virgo [8] container. The
latest HP VAN SDN Controller was upgraded to use the newer version; however this information
describes the way of verifying published services using an older version because unfortunately Virgo
dropped the “Published Services” information in the new version and now it is not possible to see
published services unless they are already consumed. Thus the old version is illustrated as a good
reference.
Virgo 3.5.0
Open a browser at
https:// [SDN_CONTROLLER_ADDRESS] :8443/admin/web/info/overview.htm and follow the
steps described by Figure 44, Figure 45, Figure 46 and Figure 47. Use ‘admin’ as user and ‘sdn’
as password. When everything works as expected the SwitchService entry under ‘Published
Services’ is seen as illustrated in Figure 47.
Figure 44 Virgo 3.5.0 Admin Console