HP VAN SDN Controller and Applications Support Matrix

3.5.3 Required SNMP settings for HP ProVision-based switches running
K/KA/WB.15.14.yyyy software versions
This application requires the following SNMP settings for HP ProVision-based switches running
K/KA/WB.15.14.yyyy software versions:
• Read-only access to the device
• Enabled SNMP v1/v2 support
To enable these settings, enter the following commands on the switch:
(config)# snmp-server community "public" operator
(config)# no snmpv3 only
For more information about these settings, see the switch documentation and the HP Network
Protector SDN Application Administrator Guide.
3.5 Supported network switches 17