HP VAN SDN Controller Administrator Guide v3

Figure 72 Open the Controller Manager configuration
Figure 73 Select the hybrid.mode Value field
In Figure 73 (page 76), the hybrid.mode field shows the current setting. Continue with the
following steps if you want to change the setting.
6. Set hybrid.mode to one of the following:
• true (the default): Enables hybrid mode. The controller makes packet-forwarding decisions
required by installed applications.
• false: Disables hybrid mode The controller makes all forwarding decisions. (Release 2.0
of the HP VAN SDN controller operates only in this mode – pure OpenFlow mode. )
76 Hybrid mode for controlling packet-forwarding