HP VAN SDN Controller Administrator Guide v3

Figure 48 Applying the filter
5. In the resulting display, only the data filtered to data path 00:00:00:00:00:00:00:02 appears.
Figure 49 Filtered Trace Log
2.10.5 Changing the OpenFlow Trace Interval
The default trace interval is ten seconds. To set a shorter or longer interval:
1. Click on Configurations.
2. Open the com.hp.sdn.ctl.of.impl.TraceManager component.
3. Click on Modify.
4. In the Value field, enter the desired duration in seconds for active trace recording.
5. Click Apply to set the new timespan for active trace recording, and return to the OpenFlow
Trace view.
48 SDN Controller Console