HP VAN SDN Controller Administrator Guide v3

In the topology display:
• To display or remove port numbers for the links, click on “Ports” in the View dropdown box
(or type P.)
• To pin or unpin the switches and end nodes, click on “Pin All” in the View dropdown box (or
type X.)
• To hide or show all switch end nodes, click on “Collapse All” in the View dropdown box (or
type G.)
Figure 35 Example of switch "Ports" labels
Figure 36 Example of "Collapse All" Option
The number appearing under the Data Path ID for a switch in the topology diagram indicates the
number of detected end nodes connected to the switch.
To toggle between hiding or showing all switch end nodes, click anywhere in the topology display
and then press the G key.
To toggle between hiding or showing the end nodes for a particular switch, click on the switch
and then press the C key.
2.9.1.2 View the Shortest Path Between Two Nodes
Select the source node and click on Src (or type S). Then select the destination node and click on
Dst (or type D). The path between the two nodes then appears as a red line.
2.9 OpenFlow Topology 41