HP Remote Graphics Software 6.0 User Guide

Network tab
Figure 6-5 Options available under the Network tab
The options available under the Network tab in the Receiver Control Panel are:
●
Error—If the Receiver fails to detect the Sender after this amount of time in seconds, the
Receiver will end the connection.
●
Warning—If the Receiver fails to detect the Sender after this amount of time in seconds, the
Receiver display a warning message.
●
Dialog—The Receiver will wait for this amount of time in seconds for a response to a dialog
being displayed on the remote computer (such as an authentication dialog). If the amount of time
waited exceeds this value, the request will be canceled.
●
Use a proxy server for your LAN—Check this box if you use a proxy server to access the
Internet. If you use a proxy server, configuring these settings is required to activate advanced
RGS features such as Advanced Video Compression and HP Velocity.
NOTE: If you use a proxy server, configuring these settings is required to activate advanced
RGS features such as Advanced Video Compression and HP Velocity.
◦
Address—Enter the proxy server address into this field if using a proxy server.
◦
Port—Enter the proxy server port into this field if using a proxy server.
Network tab 61