HP Remote Graphics Software 6.0 User Guide

Table 7-3 RGS Sender events logged in the HPRemote log (continued)
Message ID Description
Data:
UINT32 numPrimary
UINT32 numNonprimary
Event Viewer Example:
Primary connections:1
Non-primary connections:0
RGSENDER_CONNECT
EventID: 4
A new connection was established with an associated name.
If Easy Login is enabled, the name assignment will be
deferred until login and the associated name may be
“Anonymous”.
Event Viewer Message:
Connect %1.
Strings:
%1 = name associated with connection
%2 = IP address and port number of local
computer
Data:
None
Event Viewer Example:
Connect MYDOMAIN\myusername.
RGSENDER_DISCONNECT
EventID 5
A receiver has disconnected. The message will contain the
name associated with the connection. If Easy Login is
enabled and the Receiver disconnects prior to a login, the
associated name may be “Anonymous”.
Event Viewer Message:
Disconnect %1.
Strings:
%1 = name associated with connection
%2 = IP address and port number of local
computer
Data:
None
Event Viewer Example:
Disconnect MYDOMAIN\myusername.
RGSENDER_STARTUP
EventID: 1
Reference event registered to aid in interpretation of the
event log by Event Viewer. Signifies proper startup of the
RGS Sender service.
Event Viewer Message:
RGS Sender startup.
Strings:
92 Chapter 7 Advanced capabilities