HP Remote Graphics Software 6.0 User Guide

Figure 5-7 Remote Display Window
If you selected to activate HP Velocity, Advanced Video Compression, or both, and your Internet
proxy settings are set correctly, a confirmation message will be displayed.
If you selected to activate HP Velocity, Advanced Video Compression, or both, and your Internet
proxy settings are NOT set correctly, an error message will be displayed.
NOTE: If the connection attempt fails, refer to the Pre-connection checklist on page 25 , for a list of
conditions which must be met in order for a connection to be established.
NOTE: If your RGS Sender is not yet licensed, an error dialog will be displayed in the Remote
Display Window. For information on Sender licensing, see the
HP Remote Graphics Software
Licensing Guide
, available at http://www.hp.com/support/rgs.
NOTE: On Linux, the Receiver Control Panel will not stay on top of other windows in the desktop
and can therefore get lost. Also, for session managers that support multiple desktops, the Receiver
control panel will not, by default, show up in all desktops. Refer to
Setup Mode on page 51 to
understand how to raise the Receiver Control Panel to the top of the window stack.
In Normal Mode, the local computer can connect to only one remote computer at a time, as described
in
One-to-one connection on page 10 If an attempt is made to connect to a second remote computer
using the Receiver Control Panel, the connection to the first remote computer is terminated.
44 Chapter 5 Using RGS