HP Remote Graphics Software 6.0 User Guide

in the group. All group IsMutuable properties have a default value of 1, which allows the user to
interactively change the other properties in the group.
Each of the
individual properties has an associated IsMutable Boolean property to control whether
each
individual property can be interactively changed by the user—this is the individual IsMutable
property
. For example, the Rgreceiver.Network.Timeout.Error property now has the individual
Rgreceiver.Network.Timeout.Error.IsMutable property. If this RGS properties individual IsMutable
property is true, the user is allowed to interactively change the associated property, that is, the
Rgreceiver.Network.Timeout.Error property.
NOTE: For clarity, the individual IsMutable properties are not shown in the previous list; however,
they are included in the following detailed description of each property.
NOTE: In order for the user to be able to interactively change a property, the group IsMutable
property and the individual IsMutable property must both be 1 (true). If either IsMutable property is 0
(false), the user will not be able to interactively change the associated property.
In Figure 8-1 The Receiver timeout error IsMutable property is set to 0 on page 119, the Receiver is
started with the command line option –Rgreceiver.Network.Timeout.Error.IsMutable=0, which
prevents the user from changing the value of the network timeout error property.
Figure 8-1 The Receiver timeout error IsMutable property is set to 0
Because the Receiver timeout error property IsMutable property is 0, the Receiver timeout error
property cannot be changed by the user in the Receiver Control Panel (see
Figure 8-2 The Receiver
timeout error property menu is grayed out on page 120).
RGS Receiver properties 119