HP-UX Whitelisting Version A.01.02 Release Notes (766165-001,March 2014)

7. Click Download.
8. Save the HP-UX WhiteList Infrastructure bundle as a local file on your system. Use the file name
/tmp/<wli-depotname>.depot, for example.
9. Verify the depot file is saved on your system with the following command:
# swlist -d @ /tmp/<wli-depotname>.depot
10. Install the bundle:
# swinstall -x autoreboot=true -s /tmp/<wli-depotname>.depot WhiteListInf
11. Verify the installation:
# swverify WhiteListInf
If WLI is installed correctly on the system, the swverify command includes the following text in
the reported data:
Verification succeeded
WLI relies on the OpenSSL product for RSA key generation, but the OpenSSL product is not required
for installation. The latest version of OpenSSL is recommended, but any version installable on
HP-UX 11iv3 is sufficient. You can download the latest version from:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=OPENSSL11I
OpenSSL installs by default with every HP-UX OE release, but might have been removed or not
installed with the OE. To determine the OpenSSL version and verify its content, enter:
# swlist OpenSSL
# swverify OpenSSL
Installation procedure 9