HP-UX vPars and Integrity VM V6.1.5 Administrator Guide (5900-2295, April 2013)

3 Installation procedures for HP-UX vPars and Integrity VM
V6.1.5
This chapter describes the requirements and procedures for installing vPars and Integrity VM V6.1.5.
The topics include:
• Installing vPars and Integrity VM V6.1.5
• Bundle names
• Verifying the installation
• Removing vPars and Integrity VM V6.1.5
3.1 Installing vPars and Integrity VM V6.1.5
The following sections provide the installation procedures for vPars and Integrity VM V6.1.5.
3.1.1 vPars V6.1.5 installation requirements
vPars V6.1.5 is installed on the VSP after installing the BB068AA and VirtualBase bundles on the
VSP from a distribution media. Table 5 (page 35) lists the software products that must be installed
on the VSP and on vPars V6.1.5.
Table 5 Software required to be installed on VSP and vPar OS
vPar OSVSP
HP-UX 11i v3 September 2011 (AR1109) or later (any OE) on
HP Integrity Server Blade system BL8x0c i2 servers or rx2800
i2 servers
HP-UX 11i v3 March 2012 (AR1203) or later on HP Integrity
Superdome 2 servers
On the latest Intel® Itanium® 9500 processors —
HP-UX 11i v3 September 2012 (AR1209) (Base OE,
VSE-OE, or DC-OE)
On supported processors prior to the Intel® Itanium®
9500 — HP-UX 11i v3 March 2012 (AR1203) (Base
OE, VSE-OE, or DC-OE) plus AR1209 Feature11i
patches.
VirtualBaseBB068AA, VirtualBase
HP-UX GUID Manager (optional)HP-UX GUID Manager
Following Serviceguard patches (applicable only if Serviceguard
is installed):
• PHSS_42136
• PHSS_42137
Following Serviceguard patches (applicable only if
Serviceguard is installed):
• PHSS_42136
• PHSS_42137
NOTE: The vPars V6.1.5 bundle BB068AA does not include the vPars V6.1.5 GUI (Integrity
Virtual Server Manager) software, the HP-UX GUID Manager software, or the OVMM software.
The Integrity Virtual Server Manager is a separately installed ISU bundle. Integrity Virtual Server
Manager can be downloaded from the HP Software Depot at http://www.software.hp.com. The
OVMM bundle (T8718AC) is available for purchase from the AR1209 media.
Table 6 VxVM and System Fault Management
System Fault ManagementVxVM
Update System Fault Management software to:
• ProviderSvcsBase C.06.00.05.02 Provider Services
Base
• SysFaultMgmt C.07.04.07.03 HPUX System Fault
Management
If using VxVM 5.0.1, install PHKL_42649,
PHCO_42677and PHCO_42648 patches.
3.1 Installing vPars and Integrity VM V6.1.5 35