HP-UX Virtual Partitions Ordering and Configuration Guide (March 2011)

see the most recent HP-UX Virtual Partitions Administrator Guide available on the BSC website at
www.hp.com/go/hpux-vpars-docs.
4.4.4 Ignite-UX Version
vPars A.05.xx
See the Ignite-UX product documentation for the Ignite-UX version required for HP-UX 11i v3; vPars
itself has no special requirements. At this time, HP-UX 11i v3 requires Ignite-UX version C.7.1.x or
later.
vPars A.04.xx
Ignite-UX version C.6.2.241 or later is required.
NOTE: Do not use Ignite-UX version C.6.3.xx. For the latest version of Ignite-UX, see Ignite-UX
at the Software Depot website at http://www.hp.com/go/softwaredepot.
NOTE: Ignite-UX C.6.8 or later will not work with vPars A.04.01 on PA-RISC systems. Either use
an Ignite version earlier than C.6.8 and later than C.6.2.241 or upgrade to vPars A.04.02.
vPars A.03.xx
Ignite-UX version B.3.7 or later is required.
4.4.5 WLM Version
For detailed information on WLM compatibilities including required versions, see the WLM product
Release Notes available at http://www.hp.com/go/wlm.
• When using vPars, WLM, and iCAP on the same system, you will need the following minimum
versions:
◦ vPars A.03.01 or later
◦ WLM A.03.00 or later
◦ iCAP B.06.01 or later for nPartitionable servers.
iCAP B.05.01 or later for non-nPartitionable servers.
• When using Psets, vPars, WLM, and iCAP on the same system, you will need the following
minimum versions:
◦ vPars A.04.01 or later
◦ WLM A.03.01 or later
◦ iCAP B.07.00 or later
A virtual partition can be resized automatically based on application performance using WLM.
For more information on how to use WLM to accomplish this, go to the BSC website at
www.hp.com/go/hpux-core-docs, click HP-UX 11i Workload Management (gWLM/WLM) Software
and see the Resizing partitions automatically with HP-UX Workload Manager white paper. This
document is also available in the information library section of the WLM web page at http://
www.hp.com/go/wlm.
4.4.6 iCAP Version
NOTE: When using dual-core Intel® Itanium® (Montecito) systems, iCAP requires iCAP version
8.x or higher. For more information, please see the iCAP v8.x product release notes available on
the BSC website at www.hp.com/go/hp-icap-docs.
vPars A.05.xx
HP-UX 11i v3 systems require iCAP version 8.01.x or higher; vPars itself has no special requirements.
62 Supported Configurations