HP-UX Virtual Partitions Ordering and Configuration Guide (March 2011)

Table 25 vPars A.05.05, A.05.06, and A.05.07 Minimum Required Card-Related Firmware (EFI,
ROM, and Boot Code) (continued)
Flash Utility
VersionFlash Utility
Boot Code
File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
VersionDescription
Card
Product
Number
2.30
B.00.32
efiutil.efi
FCFUPDATE
—3.0.134.00.901.09PCI-X 4Gb FC &
1000Base-T
AD193A,
AD194A
B.00.32FCFUPDATE—3.0.13——PCI-X Single-Port
1000Base-T
AD331A,
AD332A
FCFUPDATE—3.02.062.72a23.21a3HP PCIe dual-port,
4GB, Fiber Channel
(FC), and dual-port
1000Base-X
adapter
AD393A
2, 3
FCFUPDATE——2.70x53.21a3PCIe 1 port 4Gb FC
(Emulex) HBA
AD299A
efiutil.efi——4.0.901.09PCIe 2 port 4Gb FC
(QLogic) HBA
AD300A
B.00.35FCFUPDATE—3.02.06——HP PCIe 4-port
1000Base-T Gigabit
Adapter
AD339A
FCFUPDATE——2.70x53.21a3HP PCIe 2-Port 4Gb
Fibre Channel HBA
AD355A
FCFUPDATE—2.0.9.8 7——HP PCI-X 266MHz
10GigE SR Card
AD385A
FCFUPDATE—1.0.0.20——HP PCI-e 10GbE SR
Card
AD386A
1.14.00.00sasflash.efi——01.23.33.0003.05.01.01HP SC44Ge Host
Bus Adapter
AH303A
4
2.50
B.00.38
efiutil.efi
FCFUPDATE
——04.03.022.01HP PCIe 1-port 8Gb
FC SR (QLogic)
HBA
AH400A
2.50
B.00.38
efiutil.efi
FCFUPDATE
——04.03.022.01HP PCIe 2-port 8Gb
FC SR (QLogic)
HBA
AH401A
1 The card utilizes the EFI driver that is in the platform’s system firmware.
2 This card has the following minimum system firmware requirements:
• rx7640, rx8640: SFW 9.48, Field Release v4.1
• Superdome on sx2000 (Integrity): SFW 9.48, Firmware Recipe 8.7e
3 The workaround for QXCR1000753480 (Long hardware path from card not recognized by vparmodify) is required
when using this card. For the workaround, see the HP-UX Virtual Partitions Release Notes A.05.03 available on the
BSC website at: http://www.hp.com/go/hpux-vpars-docs
4 Ensure that you install the EFI Boot Services Driver version 3.05.01.01 or later versions.
4.3 Supported Cards 57