HP-UX Virtual Partitions Ordering and Configuration Guide T1335DC, T1335BC, T1335AC Published: March 2010 Edition: 10.03.
© Copyright 2010 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Table of Contents 1 Introduction to This Document.......................................................................................7 1.1 What's Changed in This Document..................................................................................................7 1.1.1 Revision History........................................................................................................................7 2 Overview of Virtual Partitions..............................................................
5 Related Information......................................................................................................
List of Tables 3-1 3-2 3-3 3-4 3-5 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 vPars Product Support for HP-UX and Servers............................................................................20 Support Dates for vPars A.05.xx on 11i v3....................................................................................20 Support Dates for vPars A.04.xx on 11i v2....................................................................................
1 Introduction to This Document This document describes the configuration and version requirements for HP-UX Virtual Partitions (vPars) and vPars-related products. The information provided in this document is supplemental to other vPars documents: • HP-UX Virtual Partitions Administrator Guide (formerly Installing and Managing HP-UX Virtual Partitions) • HP-UX Virtual Partitions Release Notes All vPars documents can be found on the web at: http://docs.hp.com/hpux/os/11i/index.
• • Updated for the vPars A.04.06 release. Updated for the vPars A.05.04 release. Version 08.08.22 • Updated Table 4-10 (page 34) and Table 4-18 (page 48) with vPars A.05.03 support details for cards AD221A, AD222A, and AD393A. Version 08.04.09 • Updated for the vPars A.05.03 release. • Added “Oracle with Dynamic Virtual Partitions” (page 59). Version 08.02.29 • • Updated Section 4.2.2 (page 25) details about support for Dual-core Intel® Itanium® processor 9100 series (Montvale). Revised Section 4.4.
• • • Finalized for vPars A.04.04 release. Added vPars A.04.04 specific support information for systems and peripherals, as required, throughout this document. Updated vPars A.05.01 minimum system firmware requirements in “Server Firmware” (page 26). Version 07.03.15 • Finalized for vPars A.03.04 release. • Added AB379A (2-Port 4Gb Fibre Channel) to card firmware tables for A.04.xx in “Required Card Firmware (Integrity)” (page 38) and corrected part number to “AB287A” in Table 4-11 (page 39).
Version 06.03.07 • Additions for vPars A.04.02. Version 06.01.15 • PHKL_31227 is required for cards that have a PCI-to-PCI bridge. This includes the cards AB290A, A9782A, A9784A, and AB465A. See “Supported Mass Storage and Networking Cards (PA-RISC)” (page 32). Version 06.01.01 • Secure Path Installation Sequence for vPars A.04.01. • Updated End of Support Date for vPars A.04.01 (now based on the required firmware release rather than only the software release).
2 Overview of Virtual Partitions HP-UX Virtual Partitions (vPars) is a powerful tool that runs multiple instances of the HP-UX 11i Operating Environment (OE) simultaneously on one server or nPartition, where each virtual partition: • has its own assigned set of CPU (processing core), memory, and I/O resources (resource isolation) • runs its own separate instance of HP-UX with different patch levels (HP-UX kernel isolation) • hosts its own set of applications in a fully isolated environment (application isol
For customers that are using previous versions of vPars, HP strongly recommends that you update to the latest supported vPars version to take advantage of new features and product improvements. 2.3.1 vPars A.05.xx Releases vPars A.05.06 • An enhancement in the mon_bootpath command at Monitor prompt to put the monitor boot path at the beginning in the EFI boot manager menu, and to view the default bootpath. • Product bundling changes.
Only the following vPars releases are supported in a mixed HP-UX 11i v1/v2/v3 vPars environment: — virtual partitions running vPars A.05.03 on HP-UX 11i v3 (11.31) — virtual partitions running vPars A.04.02 or later on HP-UX 11i v2 (11.23), and — virtual partitions running vPars A.03.05 on HP-UX 11i v1 (11.11) • • Support for the next-generation mass storage subsystem in HP-UX 11i v3 (including agile addressing) has been extended to include vPars configurations and operations starting with vPars A.05.03.
supported at the CPU-core level though. For more information, see the “A.05.01 Resources” chapter in the HP-UX Virtual Partitions Administrator Guide. • Mixed HP-UX 11i v2/v3 vPars Environments You can now have a vPars A.05.01 monitor and database that simultaneously supports virtual partitions running vPars A.05.01 on HP-UX 11i v3 (11.31) and virtual partitions running vPars A.04.02 or above on HP-UX 11i v2 (11.23).
information, see the “Mixed HP-UX 11i v1/v2 vPars Environments in vPars A.04.05” section in the “Planning” chapter of the HP-UX Virtual Partitions Administrator Guide. • Support for boot and recovery from DVD (HP Integrity servers only). vPars A.04.05 supports booting from CD/DVD media on HP Integrity servers. vPars A.04.04 vPars A.04.
— — vPars A.04.xx requires HP-UX 11i v2 May 2005 Update or later vPars A.03.xx continues to support HP-UX 11i v1 Note that vPars A.04.xx and vPars A.03.xx have different product numbers: T1335BC vPars A.04.xx for HP-UX 11i v2 T1335AC vPars A.03.xx and vPars A.02.xx for HP-UX 11i v1 For more information, see “Operating Systems” (page 23). • Support for both HP Integrity and PA-RISC servers (firmware update may be required).
• Flexible Administrative Capability (formerly called Primary-Admin vPars Security) This allows administrators to designate which virtual partitions allow superusers to run virtual partition commands that affect other virtual partitions. It has been renamed from a security feature to this as it is not intended to replace current HP-UX security applications. For more information, see the “Flexible Administrative Capability” chapter in HP-UX Virtual Partitions Administrator Guide.
3 Purchasing and Licensing This section describes the licensing and the vPars releases that are currently supported. 3.1 vPars Licensing The HP-UX Virtual Partitions (vPars) product is sold on a Per Core Licensing basis. Therefore, you purchase the same quantity of this product as the number of active processing cores in your nPartitions or non-nPartitioned system that will be running vPars.
Table 3-1 vPars Product Support for HP-UX and Servers HP-UX 11i Version Supported HP-UX Releases Supported HP Server Platforms Supported vPars A.05.05 and later HP-UX 11i v3 (11.31) March 2009 or later PA-RISC and Integrity T1335BC vPars A.04.xx and later HP-UX 11i v2 (11.23) May 2005 or later PA-RISC and Integrity T1335AC vPars A.03.xx and earlier HP-UX 11i v1 (11.11) December 2000 or later PA-RISC Product Number vPars Version T1335DC 3.4 vPars Media Starting with vPars A.05.
Table 3-3 Support Dates for vPars A.04.xx on 11i v2 (continued) vPars Version Release Date Minimum End of Support Date Status A.04.05 December 2007 December 2010 Supported A.04.06 September 2008 September 2011 Supported A.04.07 March 2010 March 2013 Supported Table 3-4 Support Dates for vPars A.03.xx on 11i v1 vPars Version Release Date Minimum End of Support Date Status A.03.01 April 2004 May 2006 Unsupported A.03.02 December 2004 December 2006 Unsupported A.03.
4 Supported Configurations This section contains the following information: • Supported operating systems: operating environments (OEs) and patches • Supported servers and server firmware • Maximum number of virtual partitions per system • Minimum requirements for each virtual partition 4.1 Operating Systems vPars releases require the HP-UX versions and patch bundles listed in this section. 4.1.1 HP-UX Version vPars requires the following HP-UX versions.
4.1.2 Patch Bundle vPars A.05.06 vPars A.05.06 requires the following patch bundles from the HP-UX 11i v3 (B.11.31) March 2010 update release: • B.11.31.1003 FEATURE11i (required patches for vPars install) vPars A.05.05 vPars A.05.05 requires the following patch bundles from the HP-UX 11i v3 (B.11.31) March 2009 update release: • B.11.31.0903 FEATURE11i (required patches for vPars install) vPars A.05.04 vPars A.05.04 requires the following patch bundles from the HP-UX 11i v3 (B.11.
Table 4-4 Server Support for vPars Releases A.05.01 A.03.
• • • vPars A.03.01 or later is required when using PA-8800 and above processors. vPars A.03.04 or later—or vPars A.04.04 or later—is required when using HP 9000 servers based on the sx2000 chipset (rp7440, rp8440, and HP 9000 Superdome with sx2000 chipset). Also, PHNE_36225 (cumulative mux and pty patch) must be installed. vPars A.04.02 or later is required when using Integrity servers based on the sx2000 chipset. Further, the sx2000 chipset requires the PHKL_34088 bootloader patch. • vPars A.04.
Table 4-5 Minimum System Firmware1 for vPars A.03.xx Server Model A.03.01, A.03.022, and A.03.03 A.03.04 and A.03.05 rp5470/L3000, rp54053 43.43 44.12 43.43 43.43 rp7405, rp7410 , rp8400 6.3 KIOX 8.2, PDC 17.9 rp74204, rp84204 PDC 20.008 PDC 24.1 rp7440, rp8440 — Firmware Version 1.0 Superdome5 (PA-8600,PA-8700)6 PDC 36.7 PDC 36.8 Superdome on sx1000 chipset (PA-8800, PA-8900) PDC 20.8 PDC 24.
Table 4-6 Minimum System Firmware1 for vPars A.04.xx A.04.01 A.04.02, A.04.03 A.04.04, A.04.05, and A.04.062 (minimum) rp5470/L3000, rp5405 44.12 44.12 44.12 — rp7400/N40003 43.43 43.43 43.43 — rp7405, rp74104, rp84004 KIOX 8.2, PDC 17.9 KIOX 8.2, PDC 17.9 KIOX 8.2, PDC 17.9 — rp74204, rp84204 PDC 22.2 PDC 22.2 PDC 22.2 — rp7440, rp8440 — — Firmware Version 1.0 — Superdome (PA-8600,PA-8700)6 PDC 36.7 PDC 36.7 PDC 36.
Table 4-7 Minimum System Firmware1 for vPars A.05.xx A.05.02 (minimum ) A.05.02 4 (Integrity tape boot) A.05.03, A.05.04, and A.05.05 rp5470/L3000, rp5405 — — — — rp7400/N4000 — — — — rp7405, rp74105, rp84005 KIOX 8.2, PDC 17.9 KIOX 8.2, PDC 17.9 — KIOX 8.2, PDC 17.9 rp74205, rp84205 PDC 22.2 PDC 22.2 — PDC 22.2 rp7440, rp8440 — Firmware Version 1.0 — Firmware Version 1.0 Superdome6 (PA-8600,PA-8700) PDC 36.7 PDC 36.7 — PDC 36.
The maximum number of virtual partitions per system is the number of processing cores given the limits specified in Table 4-8.
Table 4-8 Maximum Number of Virtual Partitions Per Server Server Model Maximum Number of Virtual Partitions rp5470/L3000, rp5405 4 virtual partitions per system. rp7400/N4000 8 virtual partitions per system using the combination card A5838A (PCI 2-Port 100Base-T 2-Port Ultra2 SCSI) for boot. 7 virtual partitions when not using the combo cards. rp7405, rp7410 8 virtual partitions per system. This is a 2-cell system. rp7420, rp7440, rx7620, rx7640 8 virtual partitions per nPartition.
4.3 Supported Cards Boot Recommendations After the boot of the initial virtual partition, it is recommended that the deployment tool Ignite-UX be used to boot the other virtual partitions. Boot Constraints Beyond the recommendation above, tape, CD/DVD, and lan/bootp booting (except through Ignite-UX) of virtual partitions within a vPars environment are not supported.
Table 4-9 Mass Storage Cards Supported by vPars on PA-RISC Servers Card Product Number Description A4800A PCI FWD SCSI-2 Card for HP 9000 Servers A5149A Single Port Ultra2 SCSI HBA (PCI Bus) A5150A Dual Port Ultra2 SCSI (PCI Bus) Adapter A5158A Single Port PCI 2x Fibre Channel Adapter A5159A, A5159B Dual Port FWD SCSI (PCI Bus) Adapter A5838A PCI 2-Port 100Base-T 2-Port Ultra2 SCSI A6795A PCI 2Gb Fibre Channel Adapter A6828A PCI Ultra160 SCSI Adapter A6829A PCI Dual Channel Ultra160 SCSI
4.3.2 Supported Mass Storage and Networking Cards (Integrity) Updating Firmware All firmware steps described below require the system to be booted into nPars mode. For information on the modes for Integrity servers, see the HP-UX Virtual Partitions Administrator Guide.
Table 4-10 Bootable Cards Supported for vPars on Integrity (continued) Card Product Number Description Card Type rx7620, rx8620 A6829A 2 port U160 SCSI Mass Storage B rx7640, rx8640 Integrity Superdome on sx1000 Integrity Superdome on Supported vPars sx2000 Release(s) B B B A.04.01, A.04.02, A.04.03, A.04.04, A.04.05, A.04.06, A.04.07 A.05.01, A.05.02, A.05.03, A.05.04, A.05.05, A.05.06 A6847A Next Gen 1000B-SX (5701 chip) Networking b b D b A.04.01, A.04.02, A.04.03, A.04.04, A.04.
Table 4-10 Bootable Cards Supported for vPars on Integrity (continued) Card Product Number A9890A Description Card Type rx7620, rx8620 rx7640, rx8640 Integrity Superdome on sx1000 SmartArray 6402 2-channel RAID Mass Storage B B, N1 N Integrity Superdome on Supported vPars sx2000 Release(s) N A.04.01, A.04.04, A.04.05, A.04.06, A.04.07 A.05.01, A.05.02, A.05.03, A.05.04, A.05.05, A.05.06 A9891A SmartArray 6404 4-channel RAID Mass Storage B B, N1 N N A.04.01, A.04.04, A.04.05, A.04.06, A.
Table 4-10 Bootable Cards Supported for vPars on Integrity (continued) Card Product Number AB378B Description Card Type rx7620, rx8620 rx7640, rx8640 Integrity Superdome on sx1000 4 GB Fibre Channel (FC) Mass Storage B B B Integrity Superdome on Supported vPars sx2000 Release(s) B A.04.04, A.04.05, A.04.06, A.04.07 A.05.01, A.05.02, A.05.03, A.05.04, A.05.05, A.05.06 AB379B 4 GB Fibre Channel (FC) Mass Storage B B B B A.04.04, A.04.05, A.04.06, A.04.07 A.05.01, A.05.02, A.05.03, A.05.
Table 4-10 Bootable Cards Supported for vPars on Integrity (continued) Card Product Number AD355A Description Card Type HP PCIe 2-Port 4Gb Mass Storage Fibre Channel HBA rx7620, rx8620 rx7640, rx8640 Integrity Superdome on sx1000 — B — Integrity Superdome on Supported vPars sx2000 Release(s) B A.04.05, A.04.06, A.04.07 A.05.03, A.05.04, A.05.05, A.05.
Table 4-11 vPars A.04.01 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility Tachlite 1.17 — — FCFUPDATE B.00.12 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 A6826A 2-Port 2G Fibre Channel 1.47 3.03.154 — — efiutil.efi A6828A A6829A 1-Port/ 2-Port U160 1.04.01.
Table 4-12 vPars A.04.02, A.04.03 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility A6795A Tachlite 1.17 — — — FCFUPDATE B.00.18 A6825A Next Gen 1000B-T (5701 chip) — — —1 2.4 A6826A 2-Port 2G Fibre Channel 1.47 3.03.154 — — efiutil.efi A6828A A6829A 1-Port/ 2-Port U160 1.04.01.00 SCSI — — — efi8xxfl.efi 1.01.13 efihpvpd.
Table 4-13 vPars A.04.04 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.24 — — FCFUPDATE B.00.29 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 A6826A 2-Port 2G Fibre Channel 1.49 3.03.154 — — efiutil.efi A6828A A6829A 1-Port/ 2-Port U160 1.04.01.
Table 4-14 vPars A.04.05 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) 42 Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.24 — — FCFUPDATE B.00.29 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 A6826A 2-Port 2G Fibre Channel 1.49 3.03.154 — — efiutil.efi A6828A A6829A 1-Port/ 2-Port U160 1.04.01.
Table 4-14 vPars A.04.05 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) (continued) Card Product Number AD355A Description HP PCIe 2-Port 3.21a3 4Gb Fibre Channel HBA AH303A34 HP SC44Ge Host Bus Adapter 1 2 3 4 FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version 03.05.01.01 Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2.70x5 — — FCFUPDATE 01.23.33.00 — — sasflash.efi Flash Utility Version 1.14.00.
Table 4-15 vPars A.04.06 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) 44 Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.24 — — FCFUPDATE B.00.29 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 A6826A 2-Port 2G Fibre Channel 1.49 3.03.154 — — efiutil.efi A6828A A6829A 1-Port/ 2-Port U160 1.04.01.
Table 4-15 vPars A.04.06 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) (continued) Card Product Number Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility Flash Utility Version AD339A HP PCIe 4-port — 1000Base-T Gigabit Adapter — 3.02.06 — FCFUPDATE B.00.35 AD355A HP PCIe 2-Port 3.21a3 4Gb Fibre Channel HBA 2.70x5 — — FCFUPDATE AH303A3 HP SC44Ge Host Bus Adapter 01.23.33.
Table 4-16 vPars A.05.01 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) Card Product Number A6795A Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.24 — — FCFUPDATE B.00.29 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 A6826A 2-Port 2G Fibre Channel 1.49 3.03.154 — — efiutil.efi A6828A A6829A 1-Port/ 2-Port U160 1.04.01.00 SCSI — — — efi8xxfl.efi 1.01.13 efihpvpd.efi 1.00.
Table 4-17 vPars A.05.02 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.37 — — FCFUPDATE B.00.32 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 — — A6826A 2-Port 2G Fibre Channel 1.50 3.03.171 — — efiutil.efi 2.30 A6828A A6829A 1-Port/ 2-Port U160 1.
Table 4-18 vPars A.05.03 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) 48 Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.37 — — FCFUPDATE B.00.32 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 — — A6826A 2-Port 2G Fibre Channel 1.50 3.03.171 — — efiutil.efi 2.
Table 4-18 vPars A.05.03 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) (continued) FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility — — 3.0.13 — FCFUPDATE B.00.32 AD337A, AD338A PCIe 2-port — 1000Base-T, PCIe 2-port 1000Base-SX — 3.0.48 — FCFUPDATE B.00.32 AD299A PCIe 1 port 4Gb FC 3.21a3 (Emulex) HBA 2.70x5 — — FCFUPDATE AD300A PCIe 2 port 4Gb FC 1.09 (QLogic) HBA 4.0.
Table 4-19 vPars A.05.04 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) 50 Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.37 — — FCFUPDATE B.00.32 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 — — A6826A 2-Port 2G Fibre Channel 1.50 3.03.171 — — efiutil.efi 2.
Table 4-19 vPars A.05.04 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) (continued) FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility — — 3.0.13 — FCFUPDATE B.00.32 AD393A23 HP PCIe dual-port, 3.21a3 4GB, Fiber Channel (FC), and dual-port 1000Base-X adapter 2.72a2 3.02.06 — FCFUPDATE AD299A PCIe 1 port 4Gb FC 3.21a3 (Emulex) HBA 2.70x5 — — FCFUPDATE AD300A PCIe 2 port 4Gb FC 1.
Table 4-20 vPars A.05.05 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) 52 Card Product Number A6795A Description FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility 2G FC Tachlite 1.37 — — FCFUPDATE B.00.32 — 1 Flash Utility Version A6825A Next Gen 1000B-T (5701 chip) — — — 2.4 — — A6826A 2-Port 2G Fibre Channel 1.50 3.03.171 — — efiutil.efi 2.
Table 4-20 vPars A.05.05 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code) (continued) FC/SCSI/RAID FC/SCSI/RAID HBA EFI Driver Firmware Version Version Network (NIC) EFI Firmware Version Boot Code File Flash Utility — — 3.0.13 — FCFUPDATE B.00.32 AD393A23 HP PCIe dual-port, 3.21a3 4GB, Fiber Channel (FC), and dual-port 1000Base-X adapter 2.72a2 3.02.06 — FCFUPDATE AD299A PCIe 1 port 4Gb FC 3.21a3 (Emulex) HBA 2.70x5 — — FCFUPDATE AD300A PCIe 2 port 4Gb FC 1.
4E B0000147 B X X X 4F 01030000 ? X X 50 00002160 ? - - 1 2 10 HP 2 Gb Fibre Channel Driver - - LSI Logic Ultra320 SCSI Driver - - Intel(R) PRO/1000 v2.16 EFI-64 S=0E B=D4 D=1 F=0 I=0 S=0A B=2B D=4 F=0 I=0 S=0A B=2B D=6 F=0 I=0 1 This line shows the current version for the HP 2 GB Fibre Channel Driver as 1.47. Boot Code for the A9782A, A9784A, and AB465 Cards 1. In nPars mode from the EFI device prompt, issue the ode fcfupdate command.
NOTE: The offline I/O card and diagnostic utilities such as FCFUPDATE and IODIAG.efi do not work in vPars mode. You should remain in nPars mode to run these utilities. 4.3.6 Mass Storage Devices Storage devices supported for boot and dump within HP-UX on servers without vPars are also supported for boot and dump within a vPars environment with exceptions noted below. vPars A.05.xx, vPars A.04.xx No exceptions.
vPars A.05.xx, vPars A.04.xx J3525A (X.25) cards cannot be used with vPars on Integrity systems at this time (see JAGag33474). You must use the firmware version that is noted in the A.03.xx section below (or a later firmware version). vPars A.03.xx • The following interconnect hubs and switches are supported with vPars as follows. • Switch or Hub Firmware Version (If Applicable) FC S10 hub — Brocade 2400/2800 1Gb 2.6.1c Brocade 3800 1Gb/2Gb 3.1.1c Brocade 12000 4.0.2b, 4.1.
4.4.1 Application Certification Applications running on top of HP-UX using vPars run the same as when run on HP-UX native-mode (standalone). No changes, recompilation, or re-certification are required for applications running in the virtual partitions unless otherwise noted. 4.4.2 VSE Management Software For system requirements and installation procedures related to the Virtual Server Environment (VSE) Management Software, refer to the VSE Management Software Installation and Update Guide.
4.4.5 iCAP Version NOTE: When using dual-core Intel® Itanium® (Montecito) systems, iCAP requires iCAP version 8.x or higher. For more information, please see the iCAP v8.x product release notes available at http://docs.hp.com. vPars A.05.xx HP-UX 11i v3 systems require iCAP version 8.01.x or higher; vPars itself has no special requirements. vPars A.04.xx For vPars A.04.xx and iCAP B.07.xx, see the A.04.xx resources chapter of the HP-UX Virtual Partitions Administrator Guide for information on using iCAP B.
on the HP-UX Virtual Partition CD and is available from the HP Software Depot. 4.4.8 Online Diagnostics Versions To run the Support Tools package on a vPars server, you need the STM versions listed in this section. vPars A.05.xx See the Support Tools product documentation for the Support Tools version required for HP-UX 11i v3; vPars itself has no special requirements. vPars A.04.xx later). STM C.48.00 or later (available from the HP-UX 11i v2 May 2005 Update or vPars A.03.xx STM A.43.
5 Related Information The following websites provide useful information on related products and topics. • Partitioning, nPartitions, vPars, WLM Information http://www.hp.com/go/partitions • Server Virtualization • HP-UX 11i • HP Technical Documentation http://docs.hp.com/ — Documents for vPars on 11i v1 (A.02.xx, A.03.xx): http://www.hp.com/go/virtualization http://www.hp.com/go/HP-UX http://docs.hp.com/hpux/os/11i/index.html#Virtual%20Partitions — Documents for vPars on 11i v2 (A.04.
