HP-UX Virtual Partitions Administrator Guide (includes A.05.09) (5900-2188, March 2012)

Table 1 PA-RISC and Integrity Differences (continued)
IntegrityPA-RISCvPars Functionality
N/AServer Mode Specification Methods
• Shell> fsN:
fsN:\> vparconfig reboot
mode
• MON> reboot mode
• HP-UX# vparenv -m mode
where mode is vPars or nPars
Shell> fs0:
fs0:\> vparconfig reboot
ISL> hpux /stand/vpmon
Boot vPars Monitor Steps
vPars
...
Shell> fs0:
fs0:\> hpux vpmon
set to nPars mode before booting
nPartition
noneBooting to standalone mode special
steps
yes (vPars A.05.xx and HP-UX 11i v3
firmware only)
yesPRI and ALT saved across
nPars-mode/standalone and
vPars-mode/vPars changes
noyes (vPars A.03.xx only)Console Port Assigned to First Partition
Requirement
noyesConsole vcn listed in ioscan output
threads, mon_bootpathcat, cbuf, getauto, lifls, lsArchitecture-specific vPars Monitor
Commands
EFI level: vparconfigHP-UX level: vparadminNew vPars commands since A.03.01
HP-UX level: vparenv, vparefiutil,
vparadmin
vparboot -p target_vpar -I
[[-d dbprofile_name] | [-s
vparboot -p target_vpar -I
ignite_ux_server,
WINSTALL_path
vparboot -I
ignite_ux_server_ip [-c
client_ip -g gateway_ip -m
subnet_mask] -b boot_file [-o
optional_data]]]
target vparsource vparLAN card used in vparboot -I
not availableyes (HP-UX 11i v1 only)vPars GUI
yes (vPars A.04.04 and later, A.05.02
and later)
yes (vPars A.03.03 and later,
A.04.03 and later, A.05.xx)
Tape Boot Support
Comparing vPars Versions
This tables shows the differences in features among vPars versions.
Table 2 Differences Among vPars Versions
A.05.xxA.04.xxA.03.xxvPars Version
PA-RISC, IntegrityPA-RISC, IntegrityPA-RISCArchitectures Supported
T1335CC (Up to vPars
A.05.05)
T1335BCT1335ACProduct Number
or
T1335DC (vPars
A.05.05 and later)
38 How vPars and Its Components Work