HP-UX Virtual Partitions Administrator Guide (includes A.05.09) (5900-2188, March 2012)

[Available CPUs]: 3
[Available I/O devices (path)]: 0.0.4
0.0.6
0.0.10
0.0.12
0.0.14
1.0.1
1.0.2
1.0.6
1.0.8
1.0.10
1.0.14
[Available ILM (Base /Range)]: 0x3000000/80
(bytes) (MB) 0x10000000/512
0x50000000/768
0xb8000000/1024
0x100000000/1920
0x178000000/96
[Available ILM (MB)]: <none>
[Available CLM (CellID Base /Range)]: 0 0x70080000000/256
(bytes) (MB) 0 0x700b0000000/1152
0 0x700f8000000/120
[Available CLM (CellID MB)]: 0 504
1 0
#
vparstatus: CPU Information on vPars A.04/A.05
While a virtual partition is in the down state, no specific CPU is assigned to the virtual partition
as the boot processor but one is allocated by the vPars Monitor if needed (there are no CPUs
assigned to the virtual partition). The boot processor is determined when the virtual partition is
booted.
Note that the output does not determine which commands were issued; different commands can
be used to arrive at the same vparstatus output.
Example
Table 27 possible commands to arrive at vparstatus output
set of possible commands in sequence to create vparstatus outputvparstatus output (final)
# vparcreate -p keira1 -a cpu:::1:12 -a cpu::4
(min==1, max==12, total==4
keira1 # vparstatus -p keira1 -v
[Virtual Partition Details]
4 non-CLPs are reserved by the Monitor) Name: keira1
State: Up
Attributes:
# vparmodify -p keira1 -a cpu:1/10 -a cpu:1/12Dynamic,Autoboot,Autosearch
(since the vpar is down, total is not modified. Kernel Path: /stand/vmunix
Boot Opts:
therefore, 2 of the 4 CPUs assigned by the
Monitor [CPU Details]
become user-assigned by hardware_path (1.10 andMin/Max: 1/12
1.12). User assigned [Path]: 1.10
total==4 (2 assigned by hardware path and Boot processor [Path]: 1.12
Monitor assigned [Path]: 0.10
2 assigned by Monitor)) 0.11
1.11
Non-cell-specific:
# vparmodify -p keira1 -a cell:1:cpu::1 User assigned [Count]: 2
(since the specification is by CLP, total is Monitor assigned [Count]: 2
modified.Cell-specific [Count]: Cell
the Monitor chooses which CPU from cell 1.ID/Count
140 vPars Monitor and Shell Commands