HP-UX Virtual Partitions 6.0 Administrator Guide

Example 5 Deleting an NPIV resource
vparmodify -P vPar1 -d hba:avio_stor:,,0x50060b00006499b9,
0x50060b00006499ba:npiv:/dev/fcd1
For the relevant vPar, you can use this syntax by copying it from the I/O details of the vparstatus
command output and pasting it where required.
Removing HP-UX Virtual Partitions v6.0
You can remove the HP-UX vPars v6.0 from the VSP using the following command:
# swremove -x autoreboot=true BB068AA VirtualBase
# rm -rf/var/opt/hpvm
20 Installing and configuring HP-UX Virtual Partitions v6.0