HP Superdome 2 Partitioning Administrator Guide

A Partition commands
This appendix contains a summary of the Partition commands and descriptions of their use.
Table A-1 Partition Commands Descriptions
DescriptionCommand
Creates a new nPartition.
parcreate
Displays or changes default values of certain nPartition attributes.
pardefault
Modifies an existing nPartition.
parmodify
Configure partition configuration privilege for nPartitions and vPars.
NOTE: This command is available only from the OA.
parperm
Removes an existing nPartition.
parremove
Displays nPartition information and hardware details for a server complex.
parstatus
Describes the nPartition resource path format.
resourcepath
Creates a new Virtual Partition.
vparcreate
Boots a Virtual Partition.
vparboot
Renames or modifies the resources of a Virtual Partition.
vparmodify
Resets a Virtual Partition.
vparreset
Removes an existing Virtual Partition.
vparremove
Displays information about one or more Virtual Partitions.
vparstatus
Describes Virtual Partition resources and their requirements.
vparresources
For more information on the Partition commands, see http://www.hp.com/go/
hpux-clickable-manpages.
101