HP Integrity Virtual Machines 4.3: Installation, Configuration, Administration

disk scsi 0 0 0 2 0 disk /dev/rdisk/disk978
disk scsi 0 0 0 3 0 file /guest/g1-N-DF-SCRATCH/file
disk scsi 0 0 0 4 0 lv /dev/g1-N-L-SCRATCH/rlvol1
disk scsi 0 0 0 5 0 file /guest/g1-N-LF-SCRATCH/file
disk scsi 0 0 0 6 0 lv /dev/vx/rdsk/g1-N-V-SCRATCH/g1-N-V-SCRATCH_lv
disk scsi 0 0 0 7 0 file /guest/g1-N-VF-SCRATCH/file
[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === =================
vswitch lan intl100 1 0 1 0 8a-56-ea-60-fb-6e
vswitch lan igelan 1 0 2 0 5e-04-af-bf-b3-25
Modify the packaged Virtual Machine Summarized above? (y/n):y
Checking the virtual machine and cluster configuration
The virtual machine hpvm-sg1-g1 is currently configured as a
Serviceguard package. It is recommended that all existing packages be
re-packaged whenever any of the following changed:
HP Integrity Virtual Machine and related virtualization products
Serviceguard and related high availability products
HP Integrity Virtual Machine configuration or environment
Serviceguard cluster configuration or environment
Changes to any of these items may alter the functionality and behavior
of your package.
Continue modifying the package for this virtual machine? (y/n):y
Continuing with virtual machine and cluster analysis...
Determining package attributes and modules...
Creating modular style package files for virtual machine : hpvm-sg1-g1
Review and/or modify the package configuration file (optional)? (y/n):y
Invoking editor : emacs on file /etc/cmcluster/hpvm-sg1-g1/hpvm-sg1-g1.conf
Copy the package files to each cluster member? (y/n):y
Configure this virtual machine as a distributed guest? (y/n):y
The virtual machine has been successfully configured as a Serviceguard package.
Use cmcheckconf check the package configuration file (optional)? (y/n):y
Attempting to validate hpvm-sg1-g1.
The specified run script timeout is NO_TIMEOUT; using 1200 seconds as timeout value.
cmapplyconf will wait for this amount of time for the
script to complete before giving up.
Validation for package hpvm-sg1-g1 succeeded via /etc/cmcluster/scripts/mscripts/master_control_script.sh.
cmcheckconf: Verification completed with no errors found.
Use the cmapplyconf command to apply the configuration.
Apply the package configuration file to the cluster (optional)? (y/n):y
Attempting to validate hpvm-sg1-g1.
The specified run script timeout is NO_TIMEOUT; using 1200 seconds as timeout value.
cmapplyconf will wait for this amount of time for the
script to complete before giving up.
Validation for package hpvm-sg1-g1 succeeded via /etc/cmcluster/scripts/mscripts/master_control_script.sh.
Modify the package configuration ([y]/n)? y
Completed the cluster update
Please see the HP Integrity Virtual Machines documentation for additional
instructions on configuring Virtual Machines as Serviceguard packages.
Before running this package the following steps may need to be performed:
1. Review the files located in /etc/cmcluster/hpvm-sg1-g1/.
2. Add new LVM Volume Groups to the cluster configuration file.
3. Check the cluster and/or package configuration using the cmcheckconf command.
4. Apply the cluster and/or package configuration using the cmapplyconf command.
5. If it is running, stop the virtual machine using: hpvmstop -F -P hpvm-sg1-g1
6. Umount filesystems and deactivate volume groups used by the virtual machine
7. Start the package using: cmrunpkg hpvm-sg1-g1
AUTHORS
The hpvmsg_package command was developed by HP.
SEE ALSO
On the VM Host:
340