HP Integrity Virtual Machines 4.2: Installation, Configuration, and Administration

Inbound Non-Unicast Pkts (local) : 30000
Inbound Discards : 36
Outbound Octets :
3557451342b
Outbound Unicast Pkts (wire) : 20000
Outbound Unicast Pkts (local) : 300000
Outbound Non-Unicast Pkts : 400000
Outbound Discards : 0
-M
Displays verbose resource information in a
machine-readable format.
Individual fields are separated by one of the following
delimiters:
• The colon (:) separates each field and resource type.
• The semicolon (;) separates subfields of a resource
type.
• The comma (,) separates individual items in a list of
similar items.
The -V, -M and -X options are mutually exclusive.
-X
Displays verbose resource information in the XML format.
The -V, -M, and -X options are mutually exclusive.
-Z Used with to the -A option, clears statistics after retrieving
them.
-F
Omits the confirmation dialog before halting, deleting, or
rebooting the vswitch. This option is intended for use by
scripts and other noninteractive applications (Force mode).
-Q
Quietly performs the command. The default is to prompt
for confirmation of the command before performing it.
-c
Creates a new vswitch.
-d
Deletes an existing vswitch.
-b
Starts an existing vswitch. Vswitches must be started before
they accept guest traffic. Note that Integrity VM attempts
to automatically start all existing vswitches when Integrity
VM is started.
-h
Stops a vswitch.
-i
Enables the list of VLAN ids on the list of ports.
-n nic-id
Designates the network interface on the VM Host that this
vswitch uses. Network interfaces are displayed by the
lanscan command. If -n is not specified when creating
a vswitch, a local vswitch is created.
-o
Disables the list of VLAN ids on the list of ports.
-r
Stops and restarts a vswitch.
-u
portid:portnum:vlanid:{vlanid
| none}
Specifies the VLAN identifier for the specific vswitch and
port. Configure VLANs by specifying the number of the
port on the vswitch (portnum) to use for VLAN
communication, and the VLAN identifier (vlanid).
Virtual machines that are configured to use the VLAN can
283