AVIO WEB1211 (B.11.31.1211) and WEB1310 (B.11.31.1211.01) Product installation support and V6.x upgrade guide

Technical white paper | Product, solution, or service
3
# VirtualBase B.06.10 Base Virtualization Software
VirtualBase.vmProvider B.06.10 WBEM Provider for Integrity VM vmProvider
VirtualBase.AVIO-GVSD B.11.31.1203 HPVM Guest AVIO Storage Software
VirtualBase.AVIO-IGSSN B.11.31.1203 HP AVIO LAN IGSSN Guest Ethernet Driver
VirtualBase.vmGuestLib B.06.10 Integrity VM vmGuestLib
Example 2:
The swlist output on a system after installing AVIO WEB1211 (B.11.31.1211) on top of vPars and Integrity VM V6.1
# swlist BB068AA
# BB068AA B.06.10 HP-UX vPars & Integrity VM v6
BB068AA.HPVM B.06.10 Integrity VM HPVM
BB068AA.vmKernel B.06.10 Integrity VM vmKernel
BB068AA.vmGuestSW B.06.10 Integrity VM vmGuestSW
BB068AA.vmVirtProvider B.06.10 Integrity VM vmVirtProvider
BB068AA.VMAGENT B.06.10 HP Resource Allocation Agent for Integrity VM
# swlist VirtualBase
# VirtualBase B.06.10 Base Virtualization Software
VirtualBase.vmProvider B.06.10 WBEM Provider for Integrity VM vmProvider
VirtualBase.vmGuestLib B.06.10 Integrity VM vmGuestLib
NOTE: AVIO B.11.31.1203 products highlighted in the Example 1 will not be available on the system after
installing AVIO WEB1211 (B.11.31.1211) bundles as shown in Example 2.
Post installation of WEB1211 (B.11.31.1211), the following AVIO products will be listed.
# swlist |grep AVIO
GuestAVIOStor B.11.31.1211 HPVM Guest AVIO Storage Software
GuestAvioLan B.11.31.1211 HPVM Guest AVIO LAN Software
HostAVIOStor B.11.31.1211 HPVM Host AVIO Storage Software
HostAvioLan B.11.31.1211 HPVM Host AVIO LAN Software
If your system is in the above unsupported software configuration, please refer the system recovery section for steps to get
back to a supported configuration.
Upgrading from Integrity VM 4.x or HP-UX Virtual Partitions V6.0 to vPars and Integrity
VM 6.1 or 6.1.5 after installation of AVIO WEB1211 or WEB1310 products.
Customers who have already installed WEB1211 (B.11.31.1211) or WEB1310 (B.11.31.1211.01) AVIO products along with
Integrity VM V4.x or HP-UX Virtual Partitions V6.0 and try to upgrade to vPars and Integrity VM V6.1 (B.11.31.1203) or V6.1.5
(B.11.31.1209),will see that the upgrade process fails due to version inconsistency, but without any WARNING or ERROR
messages.
The WEB1211 (B.11.31.1211) or WEB1310 (B.11.31.1211.01) AVIO products will remain on the system and the upgrade will
fail to replace it with the vPars and Integrity VM V6.1 (B.11.31.1203) or v6.1.5 (B.11.31.1203) version of the AVIO products.
Post the upgrade, the combination of software products installed on the system will be an unsupported one.
Example 3:
Post upgrade to vPars and Integrity VM V6.1, the swlist output for BB068AA, VirtualBase and AVIO bundles on upgraded
system will be