Installing and Managing HP-UX Virtual Partitions (includes A.04.03)

Monitor and Shell Commands
EFI Boot Disk Paths, including Disk Mirrors, and vparefiutil (Integrity only)
Chapter 5
102
Solutions:
• After creating the mirror disk, set the mirror disk as alternate path using setboot.
# setboot -a
mirror_disk_hw_path
•Execute the vparefiutil command on the new disk.
# vparefiutil -u [-H
mirror_disk_hw_path ]
• Booting from a recently added boot disk.
Problem:
If you add a boot disk at a known hardware path, it may not be possible to immediately boot from this new
disk.
Solution:
• If the EFI signature of the disk is known, the vparload -E command can be used to boot from the
disk.
CAUTION It is recommended to use the documented procedure of using vparboot -I to create the virtual
partitions so that users do not have to use vparload -E. For information on the Monitor
command vparload, see the Monitor manpage vpmon (5).
vparload -E works in a trial and error fashion, meaning you may have to serially attempt
different disk indices. If there are multiple boot disks belonging to a virtual partition, booting
with vparload -E is easier if the EFI signature of the desired boot disk is known.
Attempting to boot from a incorrect boot disk may result in an ungraceful shutdown or early
panic with the message "root already mounted" if another OS instance is already booted
from that boot disk.